Open TheBreadGuy opened 7 months ago
mine is homing after print. But after I home it, I can't use the onscreen arrows to move "anything".
I have the same issue, arrows not working. Wrote FF, said to change back to previous firmware, but the machine automatically reinstalls the latest firmware so I couldn't test.
I have the same issue, arrows not working. Wrote FF, said to change back to previous firmware, but the machine automatically reinstalls the latest firmware so I couldn't test.
Tip of the spear from FF communication lol..
I have the same issue here - Adventurer 5M Pro - Firmware v2.4.5 with FlashPrint v5.8.3 (Mac Arm). Started at the same time, since the latest 2.4.5 update.
As the Issue states, the print will complete at 100% perfectly, but the machine does not register and will not home the X, Y or Z axes. At this time the Bed, Nozzle heaters are maintining print temperatures and the Fans are running continuously. I am having to manually cancel the print on the touchscreen, then manually Home all axes before I can safely access and remove the print from the built plate.
Returned mine to Amazon. Too many printing problems and too little help from support.
After latest firmware upgrade Adventurer 5M Series - 2.4.5-2.2.3-20240118 no longer homes at print completion.
This seems because printer does not correctly register that it has finished printing at 100% and manual cancellation has to be done.
Posts on reddit about issue. will add more as find.
https://www.reddit.com/r/FlashForge/comments/1agf1ii/5m_pro_not_homing_after_print/
https://www.reddit.com/r/FlashForge/comments/1afxmds/how_do_i_get_my_adventurer_5m_pros_bed_to_lower/