search

Flipper-XFW / Xtreme-Firmware

The Dom amongst the Flipper Zero Firmware. Give your Flipper the power and freedom it is really craving. Let it show you its true form. Dont delay, switch to the one and only true Master today!
https://flipper-xtre.me
GNU General Public License v3.0
9.17k stars 650 forks source link

Sub-GHz Radio Settings #426

Open bip3r opened 8 months ago

bip3r commented 8 months ago

Describe the bug.

Within Sub-GHz, under Radio Settings it is not possible to choose 'External' for Module. Only 'Internal' option available. Of course external module attached. (this works in Unleashed firmware, but I would love to come back to Xtreme :) ).

Reproduction

  1. Attached ext. Module for Sub-GHz.
  2. Sub-GHz menu.
  3. Radio Settings
  4. Module - Internal (External not available to choose)

Target

Sub-GHz - Radio Settings - Module

Logs

No response

Anything else?

With unlished firmware it works ok.

Sil333033 commented 8 months ago

can you try this?

Xtreme app -> protocols -> GPIO pins. set SPI CC1101 handle to default.

Willy-JL commented 8 months ago

if only "internal" is available, either you have the wrong SPI handle selected or your module is not connected properly. if it works on unleashed, chances are you selected the extra SPI handle. do what sil said

Marckus95 commented 2 months ago

Hello, I have the same problem with Xtreme 0053, just internal. Thank you for your help.

sergio4d commented 2 months ago

Hello, I have the same problem with Xtreme 0053, just internal. Thank you for your help.

Same here! I cannot switch between internal and external subghz modules. Only internal is available. XFW 0053 SPI handle is default.

I tried giving it 5V, enabling subghz external in firmware settings > protocol, but that didn't help.

:'(

luciferseamus commented 1 week ago

Hello, I have the same problem with Xtreme 0053, just internal. Thank you for your help.

Same here! I cannot switch between internal and external subghz modules. Only internal is available. XFW 0053 SPI handle is default.

I tried giving it 5V, enabling subghz external in firmware settings > protocol, but that didn't help.

:'(

I am having the same issue. Funny note though: if I set the CC1101 SPI to extra then go into the SubG menu the external boards LED will light up but EXT module is not a selectable option. If however, I then go back to the SPI options and reset it to default and then return to the SubG menu EXT module becomes selectable. However, the moment I try to use the antenna my Flipper will crash.