search

Flipper-XFW / Xtreme-Firmware

The Dom amongst the Flipper Zero Firmware. Give your Flipper the power and freedom it is really craving. Let it show you its true form. Dont delay, switch to the one and only true Master today!
https://flipper-xtre.me
GNU General Public License v3.0
9.16k stars 650 forks source link

SubGHz External Module - bug report + possible resolution #470

Closed bip3r closed 7 months ago

bip3r commented 7 months ago

Describe the bug.

I had an issue with external module C1011 for SubGHz. With Xtreme FW the SubGHz app didn't see the module. To test if the module itself acctually works, I installed Unleashed software.

But let's be fair - Xtreme soft is MUCH better, so I decided to revert to Xtreme despite the above "bug". I was very surprised when after such a procedure SubGHz started to see the external module without a problem.

So it's acctually not a bug report, rather a hint to those who (for some unknown reason) have the same issue as I had.

Reproduction

Attach C1011 module and check if in SubGhz -> Radio settings -> Module it shows External or just Internal without possibility to choose/change to External

Target

No response

Logs

No response

Anything else?

No response

Sil333033 commented 7 months ago

Open Xtreme app, press protocols, gpio pins and set SPI CC1101 HANDLE to DEFAULT.

Please lmk if its now still not detected

Willy-JL commented 7 months ago

or maybe its justa a poor quality module, or it wasnt connected properly, either way user error

bip3r commented 7 months ago

@ Sil333033

  1. As I mentioned in first comment it WAS already fixed, so yes - it already detects module.

@Willy-JL

  1. Module works fine.
  2. There is no way to connect unproperly as the pins just go deep into GPIO slots :)