Foamflyinfool mw-wingui issues

Foamflyinfool / mw-wingui

MULTIWII GUI CODE

3 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

WinGUI 2.3 Pre 8 crashing Multiwii Pro 2.3 B5

#68 GoogleCodeExporter opened 9 years ago
0
Stuck on initialization screen

#67 GoogleCodeExporter opened 9 years ago
13
SaveToFile and LoadFromFile does not work properly

#66 GoogleCodeExporter opened 9 years ago
2
Checkbox Items > 16 are not sent

#65 GoogleCodeExporter opened 9 years ago
2
Stuck on initialization screen

#64 GoogleCodeExporter opened 9 years ago
0
Win 8.1, 64 Bit Flight deck page missing info

#63 GoogleCodeExporter opened 9 years ago
3
Mission tab no satillite imagery

#62 GoogleCodeExporter opened 9 years ago
11
Error after click in the Mission tab

#61 GoogleCodeExporter opened 9 years ago
0
Servo settings all "unused" with QuadX but using 3 servos (stretched) for gimbal

#60 GoogleCodeExporter opened 9 years ago
1
Open log file Cancel button ignored

#59 GoogleCodeExporter opened 9 years ago
0
The conf utility connects to the board fine and displays all settings and realtime data. This GUI fails to connect.

#58 GoogleCodeExporter opened 9 years ago
5
upload mission button is not active

#57 GoogleCodeExporter opened 9 years ago
7
port problem

#56 GoogleCodeExporter opened 9 years ago
3
error message INVALID DATA

#55 GoogleCodeExporter opened 9 years ago
3
Windows 8 can't access Gui/Norton removes it as a threat

#54 GoogleCodeExporter closed 9 years ago
1
I2C GPS NAV

#53 GoogleCodeExporter closed 9 years ago
1
S.Bus corrupt

#52 GoogleCodeExporter closed 9 years ago
2
3DR-Radio firmware and stock multiwii

#51 GoogleCodeExporter closed 9 years ago
10
Error after click connect button

#50 GoogleCodeExporter opened 9 years ago
13
Wingui 2.2 and 2.3 do not display correctly in Windows 7. Work ok in Windows XP.

#49 GoogleCodeExporter closed 9 years ago
2
Disconnect model while MW Gui connected causes fatal error

#48 GoogleCodeExporter closed 9 years ago
1
Sensor graph not working properly

#47 GoogleCodeExporter closed 9 years ago
2
Save to File function does not work.

#46 GoogleCodeExporter closed 9 years ago
1
voltage monitoring gives the wrong number

#45 GoogleCodeExporter closed 9 years ago
2
Crash when connection breaks

#44 GoogleCodeExporter closed 9 years ago
5
reading the flight tuning parameter error

#43 GoogleCodeExporter closed 9 years ago
1
voltage monitoring

#42 GoogleCodeExporter closed 9 years ago
2
the pid configration section doesnot open

#41 GoogleCodeExporter closed 9 years ago
3
Scale of Level I is wrong

#40 GoogleCodeExporter closed 9 years ago
2
Unhandeled Exception when reading settings

#39 GoogleCodeExporter closed 9 years ago
11
Label-Fields to small

#38 GoogleCodeExporter closed 9 years ago
2
WinGui doesn't work with MultiWii 2.3

#37 GoogleCodeExporter closed 9 years ago
1
Way Point implementation - 2 : Get Waypoint Function in WinGUI (R53)

#36 GoogleCodeExporter closed 9 years ago
3
Way Point implementation - 1 : Set Waypoint Function in WinGUI

#35 GoogleCodeExporter closed 9 years ago
1
[R53] string format error/ AForge x64 support error / realtime tab didn't update

#34 GoogleCodeExporter closed 9 years ago
2
Win7x64 MultiWii2.0 Error

#33 GoogleCodeExporter closed 9 years ago
5
64 bit Multiwii v2.2 not working

#32 GoogleCodeExporter closed 9 years ago
1
Reading values without additions

#31 GoogleCodeExporter closed 9 years ago
1
Takes a long time to load or save a file

#30 GoogleCodeExporter closed 9 years ago
1
Bluetooth will not connect correctly in version 2.2 GUI

#29 GoogleCodeExporter closed 9 years ago
3
USB Connection: Error Device Not Responding

#28 GoogleCodeExporter closed 9 years ago
5
Questions about dbg1-4

#27 GoogleCodeExporter closed 9 years ago
1
DBG1-4 Usage

#26 GoogleCodeExporter closed 9 years ago
1
Four DBG boxes...

#25 GoogleCodeExporter closed 9 years ago
1
Must start WinGui a second time before it will connect and read the parameters.

#24 GoogleCodeExporter closed 9 years ago
6
gui_settings.xml

#23 GoogleCodeExporter closed 9 years ago
1
GPS altitude in GUI and GPS logs is reported incorrectly, with Quadrino and Quadrino GPS, appears to be at least 3300 metres out.

#22 GoogleCodeExporter closed 9 years ago
5
Win7 x64 / BT Serial connection / High CPU

#21 GoogleCodeExporter closed 9 years ago
1
On going to Map tab, no map just a system error message about a generic GDI+ error.

#20 GoogleCodeExporter closed 9 years ago
12
MultiWii 2.1 Win GUI is not working where as MultiWiiConf_2_0 is working well

#19 GoogleCodeExporter closed 9 years ago
3