Open fgrubervch opened 8 months ago
Hi, you can just use the revert guide (https://brokeaid.com/revert/) to flash the images back. Looking at your output, you were following the guide correctly, but stopped before the load code update package prompt. After you hit option 2 like the end of your output, you should get a menu asking the following:
Select Mode of Transfer (Press T/X/Y/Z for TFTP/XMODEM/YMODEM/ZMODEM) []:t
Enter Server IP []:192.168.1.49
Enter Host IP []:192.168.1.50
Enter Host Subnet Mask [255.255.255.0]:
Enter Gateway IP []:
Enter Filename []:lb6m.1.2.0.18.img
Do you want to continue? Press(Y/N): y
just fill that out (with your own tftp server details), and it will flash image1 from the tftp file
Hi, Thank you for your promptly respond.
Sorry, that the previous attachment did not have all the info, but that procedure was performed. I did it again just in case, but it is like it can't found the image inside the flash:
Hit any key to stop autoboot: 0
Scanning JFFS2 FS: done. find_inode failed for name=image1 load: Failed to find inode
.... Starting pid 618, console /dev/ttyS0: '/etc/rc.d/rc.fastpath' Mounting /dev/mtdblock0 at /mnt/fastpath. *** Mount failed! Mounting tmpfs at /mnt/application...done.
Here is the attachment with the steps that you ask me.
Should I go back and flash the broadcade and try to revert again just in case I missed something?
Please advise,
Thanks,
indeed at this point I would re-download the whole zip from my site in case the images got corrupted, then flash back to brocade. and then quanta again
Hi, Accidentally Erase the Permanent Storage (perhaps burnout or annoy by the servers noise) I guess the image1 and image2 got deleted. Is there a way to put them back into the respective folders?
I tried the broadcade route which was successful, but I was having hard time with the commands in CLI so I decided to go back to Quanta.
Here is the output from the console.
quanta01-image-error.txt
Please advise,
Thanks,