Verbose Is not getting compiled with G-code

[bangor-flyer]

Tried compiling g-code with 2.3.55 and octolapse claims no verbose g-code. went back to 2.3.54 and no problems ?

If this is a feature request describe it here

_REPLACE_THISFEATURE_REQUEST_DESCRIPTION_GOES_HERE

Version of Octolapse

Octolapse Version: _REPLACE_THISOCTOLAPSE_VERSION_GOES_HERE

Version of OctoPrint

OctoPrint Version: _REPLACE_THISOCTOPRINT_VERSION_GOES_HERE

When you ran into the problem, did you have diagnostic logging enabled?

Diagnostic Logging was Enabled: _REPLACE_THISYES_OR_NO

What were you doing when the problem occurred

1. _REPLACE_THISSTEP_ONE_GOES_HERE
2. _REPLACE_THISSTEP_TWO_GOES_HERE
3. _REPLACE_THISSTEP_...

What should have happened?

_REPLACE_THISPUT_YOUR_DESCRIPTION_HERE

What happened instead?

_REPLACE_THISPUT_YOUR_DESCRIPTION_HERE

Operating System running OctoPrint and Octolapse

OS Name: _REPLACE_THISOS_NAME_GOES_HERE Os Version: _REPLACE_THISOS_VERSION_GOES_HERE

Printer model & used firmware incl. version

Printer Model: _REPLACE_THISPRINTER_MODEL_GOES_HERE Printer Firmware Version: _REPLACE_THISPRINTER_FIRMWARE_VERSION_GOES_HERE

Browser and version of browser, operating system running browser

Browser: _REPLACE_THISBROWSER_VERSION_GOES_HERE Browser OS: _REPLACE_THISBROWSER_OS_GOES_HERE

Link to the gcode file you were printing when the problem occurred

Link to Gcode File: _REPLACE_THISGCODE_FILE_LINK_GOES_HERE

Link to settings.json

Link to settings.json with all passwords removed: _REPLACE_THISSETTINGS_JSON_LINK_GOES_HERE

Link to plugin_octolapse.log

Link to plugin_octolapse.log: LINK_GOES_HERE

Link to octoprint.log

Link to octoprint.log: _REPLACE_THISLINK_GOES_HERE

Link to contents of Javascript console in the browser

Link to javascript console output: _REPLACE_THISLINK_GOES_HERE

Screenshots and/or videos of the problem:

Screenshot/Video Links: _REPLACE_THISLINKs_GO_HERE

Please consider becoming a patron

If you like this project, please support my work by becoming a patron, and consider adding a 'star' to the repository. It takes a lot of time and effort to maintain the project and respond to issues. The cost of test prints, software, cameras, printer parts, etc. can quickly add up, so every bit helps.

You can find various videos and tutorials by subscribing to my Youtube channel. You can also follow me on Twitter.

[FormerLurker]

Please fill out the template a bit more. Im not sure what your problem is exactly.

[FormerLurker]

To be a bit more specific, v 2.3.54 of what exactly?

[FormerLurker]

Closing this since the issue hasn't been updated in a while. Let me know if you want me to reopen it.

[bangor-flyer]

Hi, i replied with the requested information and was awaiting a response from yourself on replicating the issue. Thanks Peter

On Sun, Jan 3, 2021 at 5:10 PM FormerLurker notifications@github.com wrote:

Closed #636 https://github.com/FormerLurker/Octolapse/issues/636.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/636#event-4162638029, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOBJ7PPOU42BCN4AYLDDWZDSYCQJVANCNFSM4UHTNYGA .

[bangor-flyer]

Apolliges dear friend we reopened the issue Verbose is not appearing with G-Code for octolapse #739

On Sun, Jan 3, 2021 at 5:22 PM peter mcmullan petertam54@gmail.com wrote:

Hi, i replied with the requested information and was awaiting a response from yourself on replicating the issue. Thanks Peter

On Sun, Jan 3, 2021 at 5:10 PM FormerLurker notifications@github.com wrote:

Closed #636 https://github.com/FormerLurker/Octolapse/issues/636.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/636#event-4162638029, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOBJ7PPOU42BCN4AYLDDWZDSYCQJVANCNFSM4UHTNYGA .

[FormerLurker]

Verbose is not appearing with G-Code for octolapse #739

I'm confused. There is no issue 739. Can you clarify what you mean?

[bangor-flyer]

Hi FormerLurker/Octolapse, I just took a screen grab from the issues page and hope it makes sense. And again thank you for all your hard work on superslicer Peter [image: image.png]

On Sun, Jan 3, 2021 at 6:17 PM FormerLurker notifications@github.com wrote:

Verbose is not appearing with G-Code for octolapse #739

I'm confused. There is no issue 739. Can you clarify what you mean?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/636#issuecomment-753656244, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOBJ7PNEI2BBATYQPRT5X7DSYCYCXANCNFSM4UHTNYGA .

[FormerLurker]

The screenshot is not appearing. If you attempted to email it, that's probably why. Please double check to ensure the image gets uploaded and I will take a look.

[bangor-flyer]

Donkey alert sorry buddy, my 1st day back at work and my head has been scrambled. I attached it this time to make sure Thanks Pete

On Mon, Jan 4, 2021 at 5:19 PM FormerLurker notifications@github.com wrote:

The screenshot is not appearing. If you attempted to email it, that's probably why. Please double check to ensure the image gets uploaded and I will take a look.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/636#issuecomment-754103163, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOBJ7PNYITZVV4T472PB37TSYH2AZANCNFSM4UHTNYGA .

[FormerLurker]

Try installing this new build from the plugin manager via get more->from url.. and paste this url in that box:

https://github.com/FormerLurker/Octolapse/archive/698ef46ddbd6612173bd8e17eb32549b87c7a756.zip

Let me know if that solves this issue.

FYI, I did NOT fix detection for the skirt, since there is currently a typo in superslicer. If that gets fixed, then that will start working too :)