search

FormerLurker / Octolapse

Stabilized timelapses for Octoprint
GNU Affero General Public License v3.0
639 stars 99 forks source link

Octolaps causing issues on surface of print #733

Closed Greywolf98 closed 3 years ago

Greywolf98 commented 3 years ago

If this is a feature request describe it here

Octolaps causing remnants/surface artifacts

Version of Octolapse

Octolapse Version: v0.4.1

Version of OctoPrint

OctoPrint Version: v1.6.0

When you ran into the problem, did you have diagnostic logging enabled?

Diagnostic Logging was Enabled: NO

What were you doing when the problem occurred

  1. when printing some models i noticed the remnants.
  2. realized it was only occurring when i had octolaps enabled
  3. attempted to alter settings to see if that was the issue

What should have happened?

a semi clean or at least remnant free print

What happened instead?

any model that was printed with octolaps running generated ramnant or excess filiment on model during print

Operating System running OctoPrint and Octolapse

OS Name: octoPi Os Version: v0.18.0

Printer model & used firmware incl. version

Printer Model: Ender 3 V2 Printer Firmware Version: development build: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqa3JZOTJoUTZFZFhxXzNMZWRmWEo0dHJieFd3UXxBQ3Jtc0tsNHY1SjRaM3BHa2RoUzREWVc3ZTdrRmFDa1NKSTFDM0h6M3lfaEgtV0k4VjRCYS01NU9jcjRRRVR1Q0ZzWENSbTh0ZGNsYVUtcndfazhieHhsSkRDQzRlbldPQ0d6cDJNQ0ZDWlJyOF9sTkZVUGtTNA&q=https%3A%2F%2Fgithub.com%2Fcosmoderp%2FMarlin%2Ftree%2FEnder-3-v2-Advanced-Menu-9_18_20

Screenshots and/or videos of the problem:

Screenshot/Video Links:20210506_192222 20210506_192135 20210506_192140 20210506_192211 20210506_192217 20210506_192220

Please consider becoming a patron

If you like this project, please support my work by becoming a patron, and consider adding a 'star' to the repository. It takes a lot of time and effort to maintain the project and respond to issues. The cost of test prints, software, cameras, printer parts, etc. can quickly add up, so every bit helps.

You can find various videos and tutorials by subscribing to my Youtube channel. You can also follow me on Twitter.

FormerLurker commented 3 years ago

I hope you were able to solve your issue. Sorry I didn't get back to you sooner. If you are still having problems, feel free to open it back up, thanks!