Open davop opened 3 years ago
FormerLurker
commented
3 years ago I need it to add colour to my prints but cannot then use octolapse.
I bet you can, just not with the 'automatic slicer settings' profile. However, I'll look into it. I have one other slicer on my list. Can you post a small gcode file so I can take a look at how (if) it includes the slicer settings within the gcode?
davop
commented
3 years ago Hi, Thank you, I will search for a way to use it then.
here is a link : https://share.canvas3d.io/projects/120ace6d8a986864e283d81aafb900c4
related code : I hope it's not too big
O21 D0014 O22 De06057972b249f09 O23 D0001 O24 D0000 O25 D1006400Dark_Green_Filament D1000000Black_Filament D1ff8c00Orange_Filament D0 O26 D004f O27 D001e O28 D0001 O29 D0000 O30 D0 D446db316 O30 D2 D448572f3 O30 D0 D44984f03 O30 D2 D44a71c8b O30 D0 D44b9fdc0 O30 D2 D44c8e536 O30 D0 D44dbd083 O30 D2 D44eacefe O30 D0 D44fdded4 O30 D2 D45067e71 O30 D0 D451037ef O30 D2 D4517cd60 O30 D0 D4522147b O30 D2 D4529bbf1 O30 D0 D4534aa27 O30 D2 D453c5790 O30 D0 D45474e7a O30 D2 D454effc2 O30 D0 D45587f60 O30 D2 D45602abe O30 D0 D4569ab56 O30 D2 D45715b7c O30 D0 D457b2196 O30 D2 D45816813 O30 D1 D4584b998 O30 D0 D45899360 O30 D2 D458d016c O30 D1 D4590983c O30 D2 D459406e4 O30 D0 D4598da87 O30 D2 D459c4a54 O30 D1 D459fdddc O30 D2 D45a34c03 O30 D0 D45a814ae O30 D2 D45ab826f O30 D1 D45af2465 O30 D2 D45b2923e O30 D0 D45b74d5c O30 D2 D45babb0a O30 D1 D45be67fe O30 D2 D45c1d461 O30 D0 D45c687d0 O30 D2 D45c9f268 O30 D1 D45cda204 O30 D2 D45d1097a O30 D0 D45d5bce4 O30 D2 D45d9243a O30 D1 D45dcd0d6 O30 D2 D45e037f4 O30 D0 D45e4d7ac O30 D2 D45e83ec4 O30 D1 D45ebedaf O30 D2 D45ef5194 O30 D0 D45f3f240 O30 D2 D45f752ae O30 D1 D45fafde6 O30 D2 D45fe582c O30 D0 D4601818e O30 D2 D46032c50 O30 D1 D460503eb O30 D2 D4606ac8a O30 D0 D46095a6d O30 D2 D460b0250 O30 D1 D460cd9cd O30 D2 D460e8146 O30 D0 D461174b0 O30 D2 D46131bfd O30 D1 D4614f2c2 O30 D0 D461740a0 O30 D1 D4619224b O30 D0 D461b6d07 O30 D1 D461d50a9 O30 D0 D461fa37c O30 D1 D46218a1c O30 D0 D4623e54b O30 D1 D4625ba66 O30 D0 D462808e0 O30 D1 D4629d4fe O30 D0 D463235cc O32 D11 D0000 D0000 D0000 O1 DGrogou-3-coul-dentifrice-by-Davo D00002c8e M0 ; Sliced by CANVAS ; ; Actual Slicing Settings As Used ;
; [Printer] ; extension = gcode ; costPerHour = 0 ; extruderCount = 4 ; firmwareType = RepRap 5D Absolute ; addComments = true ; g4pUsesSeconds = false ; fanPWM = true ; firmwareRetraction = false ; zSettle = 0 mm ; bedSizeX = 250 mm ; bedSizeY = 210 mm ; bedSizeZ = 210 mm ; extruderRadius = 0 mm ; bedOffsetX = 125 mm ; bedOffsetY = 105 mm ; bedOffsetZ = 0 mm ; bedRoughness = 0 mm ; roundBed = false ; xyAcceleration = 1800 mm/s^2 ; xyStepsPerMM = 1 ; defaultModelExtruder = 0 ; defaultSupportExtruder = 0 ; defaultSupportBodyExtruder = 0 ; defaultRaftExtruder = 0 ; minSegmentLength = 0 mm ; zStep = 0 mm ; maxNodesPerSecond = 0 ; extruderOrder = Reuse latest (least time) ; disableBookendDestring = false ; coolPurgeVolume = 0 mm^3 ; coolPurgeTemperatureDelta = 10 degrees C ; [Extruder 1] ; materialName = Material 1 ; axis = E ; gain = 1 ; offsetX = 0 mm ; offsetY = 0 mm ; heatTimeCoefficient = 0 ; nozzleDiameter = 0.4 mm ; nozzleLength = 0 mm ; driveLength = 0 mm ; [Extruder 2] ; materialName = Material 2 ; axis = E ; gain = 1 ; offsetX = 0 mm ; offsetY = 0 mm ; heatTimeCoefficient = 0 ; nozzleDiameter = 0.4 mm ; nozzleLength = 0 mm ; driveLength = 0 mm ; [Extruder 3] ; materialName = Material 3 ; axis = E ; gain = 1 ; offsetX = 0 mm ; offsetY = 0 mm ; heatTimeCoefficient = 0 ; nozzleDiameter = 0.4 mm ; nozzleLength = 0 mm ; driveLength = 0 mm ; [Extruder 4] ; materialName = Material 4 ; axis = E ; gain = 1 ; offsetX = 0 mm ; offsetY = 0 mm ; heatTimeCoefficient = 0 ; nozzleDiameter = 0.4 mm ; nozzleLength = 0 mm ; driveLength = 0 mm
; [Style] ; layerThickness = 0.2 mm ; maxLayerThickness = 0.2 mm ; firstLayerThickness = 0.2 mm ; unsupportedStepover = 0 mm ; supportedStepover = 0 mm ; extrusionWidth = 0.4 mm ; numLoops = 2 ; skinThickness = 0.6 mm ; infillExtrusionWidth = 0.4 mm ; infillDensityDenominator = 6 ; stackedLayers = 1 ; useCorners = true ; forceJointLayers = true ; loopsInsideOut = Perimeter Last ; joinPerimeterLoop = Seam ; infillStyle = Rounded ; travelMode = Direct ; insetSurfaceXY = 0 mm ; seamJitter = 360 degrees ; seamDepthScaler = 0.5 ; seamGapScaler = 0 ; seamAngle = 55 degrees ; crowningThreshold = -1 mm ; infillPerimeterOverlap = 0.35 ; openBase = false ; monotonicSweep = false ; semiSolidLayers = true ; travelSpeed = 150 mm/s ; zSpeed = 4 mm/s ; firstLayerSpeed = 25 mm/s ; dMaxPerLayer = 1000 mm/s ; speedTop = 50 mm/s ; speedPerim = 25 mm/s ; speedLoops = 25 mm/s ; speedSolid = 50 mm/s ; speedSparse = 55 mm/s
; [Material 1] ; fanZ = 0.4 mm ; fanLoopsPercent = 100 ; fanInsidePercent = 100 ; fanCoolPercent = 100 ; temperature = 215 degrees C ; keepWarmTemperature = 215 degrees C ; firstLayerTemperature = 215 degrees C ; bedTemperature = 60 degrees C ; chamberTemperature = 0 degrees C ; preheatStrategy = Safe ; flowMin = 0.1 mm^3/s ; flowMax = 4.4 mm^3/s ; flowCool = 2 mm^3/s ; destringLength = 1 mm ; preloadFactor = 0 ; viscosityOverElasticity_us = 0 ; destringMin = 0.5 mm ; destringTrigger = 8 mm ; preloadSpeed = 0.1 mm/s ; destringSpeed = 35 mm/s ; zLift = 0.2 mm ; minLayerTime = 5 s ; wipe = 0 mm ; costPerCm3 = 0 ; flowrateTweak = 1 ; filamentDiameter = 1.75 mm ; shrinkPercentX = 0 ; shrinkPercentY = 0 ; shrinkPercentZ = 0 ; purgeVolume = 42 mm^3 ; purgeColorStrength = 0.5 ; towerSpeed = 0 mm/s
; [Support] ; supportSheathe = Disabled ; supportDensity = Off ; useLowerInterface = false ; useCustomSupports = false ; useAutoSupportBodyExtruder = false ; solidInterface = false ; supportInflate = 2 mm ; supportGap = 2 mm ; interfaceGap = 2 mm ; supportAngle = 44.9 degrees ; supportZMax = 1e+20 mm ; sheatheZMax = 1e+20 mm ; supportStitchInterval = 0 ; minSupportPathLength = 0 mm ; raftMode = Off ; primePillarMode = No prime structure ; raftInflation = 2 mm ; raftHiStride = 0.6 mm ; raftHiThickness = 0.25 mm ; raftHiWidth = 0.36 mm ; raftLoStride = 1.2 mm ; raftLoThickness = 0.25 mm ; raftLoWidth = 0.6 mm ; topRaftSpeed = 30 mm/s ; bottomRaftSpeed = 15 mm/s ; brimSize = 0 mm ; brimHeight = 0 mm ; brimGap = 0 mm ; brimFillet = true ; interfaceBand = 0 mm ; skipSupportLayers = 1 ; firstZGap = 0.05 mm ; raftInterfaceLayers = 0 ; raftInterfaceBond = false ; brimLatch = false ; interfaceAngle = 30 degrees ; interfaceStride = 0.8 mm ; interfaceWidth = 0.4 mm ; interfaceFirstLayerWidth = 0.4 mm ; ; Chroma Profile Settings ; type = Palette 2S Pro ; connectedMode = true ; printExtruder = 0 ; firmwarePurge = 0 mm ; bowdenTubeLength = 150 mm ; makerbot5thGen = false ; loadingOffset = 0 ; printValue = 0 ; calibrationLength = 0 mm ; transitionMethod = Transition tower ; transitionLength = 105 mm ; useZiggurats = false ; initialTransitionLength = 105 mm ; transitionTarget = 0.3 ; jogPauses = false ; pingDestringLength = 0 mm ; purgeToInfill = false ; useVariableTransitionLengths = false ; towerMinBrims = 1 ; towerMinDensity = 0.05 ; towerMinBottomDensity = 0.8 ; towerMaxDensity = 0.95 ; towerForceBottomPerimeter = true ; pingOffTower = false ; towerExtrusionWidth = auto ; sideDumpPurgeInPlace = false ; sideDumpPurgeSpeed = 4 mm/s ; sideDumpX = 0 mm ; sideDumpY = 0 mm ; sideDumpEdge = North
; G-code Prefix ; G90 G92 E0 T0 M82 M115 U3.1.0 ; use the latest firmware version G28 W ; home all axes without mesh bed leveling M140 S60 ; start heating the bed M190 S60 ; wait until bed heated M104 S215 ; start heating extruder G80 ; run mesh bed leveling routine M109 S215 ; wait for extruder temperature G1 Y-3.0 F1000.0 ; prepare to prime G92 E0 ; reset extrusion distance G1 X60.0 E9.0 F1000.0 ; priming G1 X100.0 E12.5 F1000.0 ; priming M900 K30; K45 for PET, K30 for PLA/ABS G92 E0 ; reset extrusion distance M82 G92 E0 G1 E-1 F2100 ; destring suck G92 E0 ; ; Main G-code ; ; BEGIN_LAYER_OBJECT z=0.2000 z_thickness=0.2000 ; ; Selecting and Warming Extruder 1 to 215 degrees C ; Chroma changing to print extruder (T0) ; changing logical extruder to T0 ; process Drive 1 T0 M104 S215 T0 ; ; ; ; 'Loop Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; inner perimeter G1 X129.843 Y101.43 Z0.4 F9000 ; ; Layer Change ; layer 1, Z = 0.2 ; G1 X129.843 Y101.43 Z0.2 F240 ; 'Destring Prime' G1 E1 F2100 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X129.944 Y101.536 E1.00487 F1500 G1 X130.247 Y101.854 E1.01947 G1 X130.752 Y102.383 E1.04381 G1 X131.067 Y102.772 E1.06046 G1 X131.434 Y103.188 E1.07892 G1 X132.119 Y104.422 E1.12585 G1 X132.331 Y105.042 E1.14764 G1 X132.493 Y106.026 E1.18082 G1 X132.672 Y107.11 E1.21736 G1 X132.566 Y108.431 E1.26145 G1 X132.234 Y109.728 E1.30597 G1 X131.656 Y110.982 E1.35188 G1 X130.871 Y112.099 E1.39732 G1 X129.915 Y113.052 E1.4422 G1 X128.826 Y113.808 E1.48627 G1 X127.572 Y114.384 E1.53219 G1 X126.284 Y114.72 E1.57644 G1 X124.908 Y114.828 E1.62235 G1 X123.636 Y114.748 E1.66475 G1 X122.329 Y114.425 E1.70954 G1 X121.149 Y113.852 E1.75316 G1 X119.993 Y113.077 E1.79947 ; Prepare for Perimeter G1 X119.01 Y112.086 E1.84588 G1 X118.293 Y111.011 E1.88885 G1 X117.841 Y110.008 E1.92544 G1 X117.674 Y109.545 E1.94181 G1 X117.386 Y108.337 E1.98311 G1 X117.305 Y107.023 E2.02691 G1 X117.465 Y105.643 E2.07312 G1 X117.822 Y104.427 E2.11525 G1 X118.419 Y103.211 E2.16032 G1 X119.197 Y102.147 E2.20414 G1 X120.138 Y101.244 E2.24755 G1 X121.236 Y100.501 E2.29164 G1 X122.518 Y99.942 E2.33816 G1 X123.76 Y99.64 E2.38068 G1 X125.092 Y99.554 E2.42507 G1 X125.805 Y99.645 E2.44898 G1 X126.391 Y99.72 E2.46863 G1 X126.969 Y99.888 E2.48864 G1 X127.315 Y99.99 E2.50065 G1 X127.431 Y100.024 E2.50465 ; Perimeter Length = 48.757309 ; ; 'Perimeter Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; outer perimeter G1 X127.538 Y100.058 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X127.56 Y100.065 E2.50543 F1500 G1 X127.724 Y100.143 E2.51148 G1 X128.052 Y100.299 E2.52355 G1 X128.542 Y100.533 E2.54162 G1 X128.56 Y100.548 E2.5424 G1 X128.57 Y100.569 E2.54317 G1 X128.569 Y100.593 E2.54395 G1 X128.477 Y100.902 E2.55468 G1 X128.478 Y100.933 E2.5557 G1 X128.497 Y100.957 E2.55672 G1 X128.837 Y101.193 E2.5705 G1 X129.602 Y101.756 E2.60209 G1 X130.406 Y102.593 E2.64069 G1 X130.748 Y103.018 E2.65881 G1 X131.088 Y103.396 E2.67574 G1 X131.792 Y104.672 E2.72419 G1 X131.951 Y105.19 E2.74223 G1 X132.268 Y107.091 E2.80633 G1 X132.167 Y108.384 E2.84947 G1 X131.846 Y109.624 E2.89206 G1 X131.308 Y110.775 E2.93434 G1 X130.554 Y111.854 E2.9781 G1 X129.668 Y112.734 E3.01965 G1 X128.581 Y113.481 E3.06353 G1 X127.424 Y114.012 E3.10585 G1 X126.234 Y114.32 E3.14674 G1 X124.936 Y114.426 E3.19005 G1 X123.679 Y114.349 E3.23193 G1 X122.411 Y114.026 E3.27545 G1 X121.306 Y113.476 E3.31652 G1 X120.205 Y112.73 E3.36074 G1 X119.303 Y111.809 E3.40364 G1 X118.577 Y110.69 E3.44798 G1 X118.095 Y109.584 E3.48812 G1 X117.795 Y108.357 E3.53014 G1 X117.711 Y107.024 E3.57455 G1 X117.851 Y105.749 E3.61721 G1 X118.183 Y104.592 E3.65724 G1 X118.767 Y103.417 E3.70089 G1 X119.485 Y102.425 E3.74161 G1 X120.38 Y101.564 E3.78292 G1 X121.482 Y100.83 E3.82697 G1 X122.614 Y100.331 E3.8681 G1 X123.757 Y100.046 E3.90729 G1 X125.06 Y99.955 E3.95073 G1 X126.305 Y100.111 E3.99246 G1 X127.459 Y100.454 E4.0325 G1 X128.455 Y100.938 E4.06932 G1 X128.482 Y100.942 E4.07024 G1 X128.508 Y100.932 E4.07117 G1 X128.582 Y100.873 E4.07431 G1 X128.683 Y100.66 E4.08216 G1 X128.703 Y100.639 E4.08312 G1 X128.731 Y100.631 E4.08407 G1 X128.758 Y100.641 E4.08503 G1 X129.403 Y101.103 E4.11142 G1 X129.726 Y101.335 E4.12465 G1 X129.766 Y101.365 E4.12633 ; ; 'Loop Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; inner perimeter G1 X132.331 Y101.346 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X132.437 Y101.457 E4.13144 F1500 G1 X132.754 Y101.792 E4.14678 G1 X133.284 Y102.349 E4.17234 G1 X133.606 Y102.705 E4.18831 G1 X133.904 Y102.991 E4.20204 G1 X134.165 Y103.223 E4.21364 G1 X134.573 Y103.801 E4.23721 G1 X135.05 Y104.609 E4.26841 G1 X135.407 Y105.236 E4.29241 G1 X135.849 Y105.843 E4.31738 G1 X136.122 Y106.191 E4.3321 G1 X136.165 Y106.451 E4.34084 G1 X135.991 Y107.11 E4.36352 G1 X135.706 Y107.669 E4.3844 G1 X135.231 Y108.829 E4.42609 G1 X134.703 Y109.869 E4.46486 G1 X134.093 Y110.884 E4.50424 G1 X133.538 Y111.645 E4.53558 G1 X132.704 Y112.443 E4.57398 G1 X131.972 Y112.998 E4.60452 G1 X130.708 Y113.779 E4.65396 G1 X129.399 Y114.436 E4.70266 G1 X128.479 Y114.799 E4.73556 G1 X127.186 Y115.15 E4.78011 G1 X125.894 Y115.33 E4.82352 G1 X124.648 Y115.359 E4.86497 G1 X123.556 Y115.268 E4.90141 G1 X122.371 Y115.08 E4.94131 G1 X121.831 Y114.919 E4.96008 G1 X120.502 Y114.422 E5.00725 G1 X119.045 Y113.677 E5.06168 G1 X118.183 Y113.135 E5.09555 G1 X117.258 Y112.432 E5.1342 G1 X116.421 Y111.566 E5.17424 G1 X115.952 Y110.913 E5.20096 G1 X115.114 Y109.483 E5.25612 G1 X114.456 Y108.044 E5.30873 G1 X114.025 Y107.055 E5.34462 G1 X113.855 Y106.491 E5.36421 G1 X113.842 Y106.243 E5.37247 ; Prepare for Perimeter G1 X114.4 Y105.54 E5.40231 G1 X114.777 Y104.995 E5.42438 G1 X115.459 Y103.979 E5.46508 G1 X115.924 Y103.363 E5.49074 G1 X116.347 Y102.803 E5.51408 G1 X117.362 Y101.407 E5.57148 G1 X117.86 Y100.868 E5.5959 G1 X118.314 Y100.476 E5.61583 G1 X118.852 Y100.147 E5.63682 G1 X120.069 Y99.731 E5.67958 G1 X120.754 Y99.386 E5.70508 G1 X121.379 Y99.029 E5.72905 G1 X121.966 Y98.6 E5.75323 G1 X122.469 Y98.268 E5.77328 G1 X123.381 Y97.687 E5.80923 G1 X124.008 Y97.464 E5.83136 G1 X124.602 Y97.375 E5.85136 G1 X125.571 Y97.382 E5.88357 G1 X125.964 Y97.462 E5.89692 G1 X126.326 Y97.675 E5.91089 G1 X126.876 Y97.908 E5.93074 G1 X127.619 Y98.428 E5.96092 G1 X128.538 Y99.028 E5.99742 G1 X129.212 Y99.441 E6.0237 G1 X129.703 Y99.698 E6.04215 G1 X129.998 Y99.853 E6.05321 G1 X130.096 Y99.904 E6.0569 ; Perimeter Length = 66.552917 ; ; 'Perimeter Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; outer perimeter G1 X130.197 Y99.944 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X130.288 Y99.965 E6.06001 F1500 G1 X130.575 Y100.04 E6.06986 G1 X131.058 Y100.167 E6.08648 G1 X131.186 Y100.222 E6.0911 G1 X131.219 Y100.225 E6.09221 G1 X131.246 Y100.205 E6.09331 G1 X131.41 Y99.976 E6.10271 G1 X131.472 Y99.937 E6.10513 G1 X131.503 Y99.929 E6.10618 G1 X131.532 Y99.941 E6.10723 G1 X131.972 Y100.327 E6.12672 G1 X132.372 Y100.841 E6.14836 G1 X133.114 Y101.577 E6.18313 G1 X133.784 Y102.331 E6.21667 G1 X134.108 Y102.645 E6.23166 G1 X134.417 Y102.903 E6.24505 G1 X134.813 Y103.428 E6.26693 G1 X135.396 Y104.401 E6.30466 G1 X135.754 Y105.03 E6.32873 G1 X136.198 Y105.633 E6.35366 G1 X136.507 Y106.043 E6.37071 G1 X136.581 Y106.419 E6.38346 G1 X136.503 Y106.816 E6.3969 G1 X136.29 Y107.412 E6.41797 G1 X136.02 Y107.967 E6.4385 G1 X135.637 Y108.906 E6.47222 G1 X135.108 Y109.972 E6.51179 G1 X134.481 Y111.032 E6.55276 G1 X133.914 Y111.823 E6.58515 G1 X133.02 Y112.705 E6.62691 G1 X131.972 Y113.482 E6.67029 G1 X130.78 Y114.198 E6.71654 G1 X129.404 Y114.867 E6.76743 G1 X128.584 Y115.186 E6.79669 G1 X127.394 Y115.512 E6.83772 G1 X126.127 Y115.715 E6.88042 G1 X124.928 Y115.77 E6.92034 G1 X123.814 Y115.707 E6.95746 G1 X122.578 Y115.528 E6.99897 G1 X121.911 Y115.368 E7.02179 G1 X120.489 Y114.853 E7.0721 G1 X119.228 Y114.237 E7.11876 G1 X118.229 Y113.652 E7.1573 G1 X117.08 Y112.81 E7.20465 G1 X116.238 Y111.961 E7.24443 G1 X115.74 Y111.33 E7.27118 G1 X114.86 Y109.863 E7.32807 G1 X114.225 Y108.529 E7.3772 G1 X113.654 Y107.21 E7.425 G1 X113.47 Y106.598 E7.44625 G1 X113.424 Y106.192 E7.45984 G1 X113.584 Y105.93 E7.47006 G1 X114.01 Y105.394 E7.49285 G1 X114.514 Y104.655 E7.52257 G1 X115.319 Y103.486 E7.56979 G1 X115.744 Y102.91 E7.5936 G1 X116.47 Y101.966 E7.63322 G1 X117.191 Y100.98 E7.67384 G1 X117.905 Y100.281 E7.70707 G1 X118.407 Y99.934 E7.72734 G1 X118.874 Y99.709 E7.74461 G1 X119.86 Y99.388 E7.77909 G1 X120.505 Y99.065 E7.80307 G1 X121.174 Y98.68 E7.82875 G1 X121.804 Y98.229 E7.85453 G1 X122.409 Y97.818 E7.87885 G1 X123.209 Y97.326 E7.91011 G1 X123.894 Y97.079 E7.93431 G1 X124.57 Y96.969 E7.95708 G1 X125.504 Y96.979 E7.98816 G1 X126.044 Y97.058 E8.0063 G1 X126.412 Y97.269 E8.02042 G1 X126.918 Y97.473 E8.03855 G1 X127.602 Y97.918 E8.06571 G1 X128.275 Y98.357 E8.09244 G1 X129.244 Y99.001 E8.13114 G1 X130.324 Y99.562 E8.1716 G1 X131.12 Y99.757 E8.19887 G1 X131.469 Y99.91 E8.21154 G1 X131.489 Y99.926 E8.21239 G1 X131.498 Y99.95 E8.21325 G1 X131.495 Y99.976 E8.2141 G1 X131.398 Y100.202 E8.22229 G1 X131.357 Y100.284 E8.22534 G1 X131.353 Y100.316 E8.2264 G1 X131.368 Y100.344 E8.22746 G1 X131.704 Y100.649 E8.24254 G1 X131.946 Y100.941 E8.25518 G1 X132.116 Y101.147 E8.26404 G1 X132.221 Y101.244 E8.2688 G1 X132.258 Y101.278 E8.27046 ; ; 'Destring/Wipe/Jump Path', 0.0 [feed mm/s], 25.0 [head mm/s] ; travel ; 'Destring Suck' G1 E7.27046 F2100 ; head speed 25.000000, filament speed 0.000000, preload 0.000000 ; path_width=0.4000 G1 X132.258 Y101.278 Z0.4 F240 ; ; 'Solid Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; solid layer G1 X122.499 Y98.45 F9000 G1 X122.499 Y98.45 Z0.2 F240 ; 'Destring Prime' G1 E8.27046 F2100 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X122.368 Y98.581 E8.2766 F1500 G1 X121.977 Y98.972 E8.295 G1 X121.325 Y99.624 E8.32568 G1 X120.412 Y100.537 E8.36863 G1 X119.238 Y101.711 E8.42385 G1 X117.803 Y103.146 E8.49134 G1 X114.151 Y106.798 E8.66313 G1 X114.304 Y107.211 E8.67776 G1 X117.96 Y103.554 E8.84974 G1 X117.946 Y103.584 E8.85085 G1 X117.423 Y104.657 E8.89054 G1 X114.479 Y107.602 E9.02904 G1 X114.649 Y107.997 E9.04336 G1 X117.305 Y105.341 E9.16828 G1 X117.3 Y105.362 E9.16901 G1 X117.124 Y106.088 E9.19385 G1 X114.814 Y108.398 E9.30249 G1 X114.993 Y108.784 E9.31666 G1 X117.109 Y106.668 E9.41619 G1 X117.108 Y106.683 E9.41668 G1 X117.058 Y107.285 E9.43677 G1 X115.173 Y109.17 E9.52544 G1 X115.364 Y109.545 E9.53943 G1 X117.122 Y107.787 E9.62213 G1 X117.122 Y107.798 E9.62249 G1 X117.158 Y108.317 E9.63978 G1 X115.565 Y109.91 E9.71472 G1 X115.777 Y110.263 E9.72843 G1 X117.264 Y108.776 E9.79838 G1 X117.266 Y108.782 E9.7986 G1 X117.379 Y109.227 E9.81386 G1 X115.99 Y110.616 E9.87919 G1 X116.204 Y110.968 E9.89289 G1 X117.501 Y109.671 E9.95389 G1 X117.653 Y110.084 E9.96854 G1 X116.429 Y111.308 E10.02611 G1 X116.69 Y111.613 E10.03945 G1 X117.833 Y110.47 E10.09323 G1 X118.002 Y110.866 E10.10757 G1 X116.959 Y111.909 E10.15663 G1 X117.243 Y112.191 E10.16993 G1 X118.214 Y111.22 E10.21558 G1 X118.44 Y111.56 E10.22916 G1 X117.552 Y112.448 E10.27089 G1 X117.876 Y112.69 E10.28433 G1 X118.666 Y111.9 E10.32149 G1 X118.902 Y112.23 E10.33498 G1 X118.203 Y112.928 E10.36782 G1 X118.539 Y113.158 E10.38135 G1 X119.191 Y112.506 E10.412 G1 X119.473 Y112.789 E10.42531 G1 X118.89 Y113.373 E10.45275 G1 X119.252 Y113.577 E10.46657 G1 X119.748 Y113.08 E10.48991 G1 X120.062 Y113.332 E10.50329 G1 X119.62 Y113.774 E10.52409 G1 X119.995 Y113.965 E10.53808 G1 X120.401 Y113.559 E10.55718 G1 X120.728 Y113.797 E10.57065 G1 X120.38 Y114.145 E10.587 G1 X120.769 Y114.322 E10.60121 G1 X121.067 Y114.025 E10.61519 G1 X121.439 Y114.218 E10.62915 G1 X121.19 Y114.467 E10.64086 G1 X121.596 Y114.627 E10.65536 G1 X121.74 Y114.483 E10.66212 G1 X122.233 Y114.556 E10.67867 G1 X122.228 Y114.561 E10.6789 G1 X122.084 Y114.704 E10.68567 G1 X122.448 Y114.906 E10.69952 G1 X122.534 Y114.82 E10.70357 G1 X122.908 Y115.011 E10.71755 G1 X123.124 Y114.795 E10.7277 ; ; 'Solid Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; solid layer G1 X124.976 Y115.207 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X125.075 Y115.109 E10.73234 F1500 G1 X125.558 Y115.19 E10.74863 G1 X125.653 Y115.109 E10.75279 G1 X126.267 Y115.047 E10.77332 G1 X126.472 Y114.842 E10.78295 G1 X126.835 Y115.044 E10.79678 G1 X127.128 Y114.751 E10.81058 G1 X127.226 Y114.653 E10.81518 ; ; 'Solid Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; solid layer G1 X127.545 Y114.9 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X127.61 Y114.835 E10.81825 F1500 G1 X127.806 Y114.639 E10.82747 G1 X128.133 Y114.312 E10.84284 G1 X128.337 Y114.674 E10.85665 G1 X128.927 Y114.083 E10.88441 G1 X129.281 Y113.729 E10.90107 G1 X129.399 Y113.611 E10.90662 ; ; 'Solid Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; solid layer G1 X131.768 Y112.94 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X131.859 Y112.849 E10.91094 F1500 G1 X132.134 Y112.574 E10.92387 G1 X132.592 Y112.115 E10.94542 G1 X133.234 Y111.474 E10.9756 G1 X133.692 Y111.016 E10.99716 G1 X133.967 Y110.741 E11.01009 G1 X134.059 Y110.649 E11.0144 ; ; 'Solid Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; solid layer G1 X134.82 Y109.322 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X134.701 Y109.44 E11.01998 F1500 G1 X134.345 Y109.796 E11.03672 G1 X133.751 Y110.388 E11.06462 G1 X132.919 Y111.217 E11.10368 G1 X131.849 Y112.283 E11.1539 G1 X130.542 Y113.585 E11.21528 G1 X129.461 Y114.115 E11.25532 G1 X129.485 Y114.091 E11.25643 G1 X135.139 Y108.422 E11.52274 G1 X135.532 Y107.479 E11.55672 G1 X135.51 Y107.5 E11.55774 G1 X134.275 Y108.736 E11.61586 G1 X133.264 Y109.747 E11.6634 G1 X132.478 Y110.533 E11.70038 G1 X131.916 Y111.095 E11.7268 G1 X131.579 Y111.431 E11.74265 G1 X131.467 Y111.544 E11.74793 ; ; 'Solid Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; solid layer G1 X132.167 Y110.278 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X132.272 Y110.173 E11.75289 F1500 G1 X132.589 Y109.856 E11.76778 G1 X133.116 Y109.329 E11.79259 G1 X133.855 Y108.59 E11.82732 G1 X134.804 Y107.641 E11.87198 G1 X135.965 Y106.48 E11.92656 G1 X135.796 Y106.083 E11.9409 G1 X132.612 Y109.268 E12.09068 G1 X132.618 Y109.244 E12.09149 G1 X132.827 Y108.487 E12.11761 G1 X135.553 Y105.761 E12.24583 G1 X135.32 Y105.428 E12.25935 G1 X132.854 Y107.894 E12.37536 G1 X132.855 Y107.879 E12.37587 G1 X132.913 Y107.269 E12.39625 G1 X135.091 Y105.092 E12.49866 G1 X134.895 Y104.722 E12.51258 G1 X132.848 Y106.768 E12.60883 G1 X132.847 Y106.759 E12.60915 G1 X132.774 Y106.277 E12.62537 G1 X134.696 Y104.355 E12.71576 G1 X134.483 Y104.002 E12.72947 G1 X132.686 Y105.8 E12.81402 G1 X132.684 Y105.791 E12.81432 G1 X132.603 Y105.316 E12.83034 G1 X134.269 Y103.651 E12.90867 G1 X134.026 Y103.328 E12.92211 G1 X132.492 Y104.862 E12.99427 G1 X132.349 Y104.44 E13.0091 G1 X133.725 Y103.063 E13.07386 G1 X133.445 Y102.778 E13.08716 G1 X132.148 Y104.075 E13.14817 G1 X131.95 Y103.707 E13.16206 G1 X133.179 Y102.478 E13.21988 G1 X132.907 Y102.185 E13.2332 G1 X131.743 Y103.348 E13.28794 G1 X131.527 Y102.999 E13.30161 G1 X132.636 Y101.89 E13.35377 G1 X132.363 Y101.597 E13.36708 G1 X131.245 Y102.715 E13.41968 G1 X130.986 Y102.408 E13.43303 G1 X132.069 Y101.325 E13.48397 G1 X131.794 Y101.035 E13.49728 G1 X130.724 Y102.104 E13.5476 G1 X130.445 Y101.818 E13.56091 G1 X131.547 Y100.716 E13.61274 G1 X131.25 Y100.448 E13.62606 G1 X130.166 Y101.532 E13.67705 G1 X129.881 Y101.251 E13.69035 G1 X130.822 Y100.31 E13.7346 G1 X130.815 Y100.308 E13.73483 G1 X130.365 Y100.201 E13.75021 G1 X129.564 Y101.001 E13.78787 G1 X129.234 Y100.766 E13.80136 G1 X129.954 Y100.046 E13.83521 G1 X129.579 Y99.855 E13.8492 G1 X128.913 Y100.521 E13.88052 G1 X128.544 Y100.324 E13.89443 G1 X129.213 Y99.655 E13.9259 G1 X128.842 Y99.461 E13.93983 G1 X128.165 Y100.138 E13.97171 G1 X127.784 Y99.953 E13.98579 G1 X128.512 Y99.226 E14.02 G1 X128.177 Y98.995 E14.03353 G1 X127.377 Y99.794 E14.07113 G1 X126.94 Y99.666 E14.08628 G1 X127.832 Y98.774 E14.12825 G1 X127.485 Y98.555 E14.1419 G1 X126.515 Y99.524 E14.18749 G1 X126.03 Y99.445 E14.20386 G1 X126.036 Y99.438 E14.20417 G1 X127.157 Y98.318 E14.25689 G1 X126.824 Y98.085 E14.2704 G1 X125.528 Y99.379 E14.33132 G1 X125.009 Y99.334 E14.34866 G1 X125.017 Y99.326 E14.34903 G1 X126.426 Y97.917 E14.4153 G1 X126.033 Y97.745 E14.42958 G1 X124.41 Y99.353 E14.50555 G1 X123.804 Y99.408 E14.52579 G1 X123.817 Y99.395 E14.52637 G1 X125.59 Y97.622 E14.60977 G1 X125.578 Y97.621 E14.61018 G1 X125.044 Y97.602 E14.62795 G1 X123.096 Y99.534 E14.71919 G1 X122.313 Y99.768 E14.74637 G1 X122.331 Y99.749 E14.74724 G1 X123.445 Y98.635 E14.79964 G1 X124.425 Y97.656 E14.84572 G1 X124.405 Y97.659 E14.84639 G1 X123.704 Y97.811 E14.87026 G1 X122.774 Y98.74 E14.91397 G1 X122.052 Y99.463 E14.94797 G1 X121.535 Y99.979 E14.97226 G1 X121.225 Y100.289 E14.98683 G1 X121.122 Y100.393 E14.99169 ; ; 'Solid Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; solid layer G1 X120.887 Y99.496 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 G1 X120.748 Y99.635 E14.99824 F1500 G1 X120.33 Y100.053 E15.0179 G1 X119.633 Y100.75 E15.05066 G1 X118.658 Y101.725 E15.09654 G1 X116.29 Y104.094 E15.20794 G1 X115.315 Y105.069 E15.25381 G1 X114.618 Y105.765 E15.28657 G1 X114.2 Y106.183 E15.30623 G1 X114.061 Y106.323 E15.31279 ; ; 'Solid Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; solid layer G1 X115.226 Y104.592 F9000 ; head speed 25.000000, filament speed 0.831503, preload 0.000000 ; path_width=0.4000 ; Prepare for End-Of-Layer G1 X115.35 Y104.468 E15.31861 F1500 G1 X115.721 Y104.097 E15.33607 G1 X116.34 Y103.478 E15.36518 G1 X117.206 Y102.611 E15.40594 G1 X118.32 Y101.497 E15.45833 G1 X119.682 Y100.136 E15.52237 G1 X119.658 Y100.144 E15.52322 G1 X118.803 Y100.449 E15.55339 G1 X117.948 Y101.304 E15.5936 G1 X117.338 Y101.914 E15.62232 G1 X116.971 Y102.28 E15.63955 G1 X116.849 Y102.403 E15.64529 ; ; 'Destring/Wipe/Jump Path', 0.0 [feed mm/s], 25.0 [head mm/s] ; travel ; 'Destring Suck' G1 E14.64529 F2100 ; head speed 25.000000, filament speed 0.000000, preload 0.000000 ; path_width=0.4000 ; Prepare for End-Of-Layer ; time estimate: pre = 20.818283 s, post = 18.381714 s ; Dwell time remaining = -13.381713 s ; ; Post-layer lift G1 X116.849 Y102.403 Z0.6 F240 ; END_LAYER_OBJECT z=0.200 ; Reset extruder pos G92 E0 ; BEGIN_LAYER_OBJECT z=0.4000 z_thickness=0.2000 ; ; 'Loop Path', 0.8 [feed mm/s], 25.0 [head mm/s] ; inner perimeter ; chroma inserting sparse tower layer ; transition tower auto-brim ; brim loop ; path_width=0.400000 G1 X155.4 Y133.819 F9000 G1 Z0.2 F240 G1 E1 F2100 ; destring prime ; Reset extruder pos G92 E0 G1 X155.4 Y134.002 E0.00608 F1500 G1 X155.4 Y134.55 E0.02432 F1500 G1 X155.4 Y135.464 E0.05472 F1500 G1 X155.4 Y136.744 E0.09729 F1500 G1 X155.4 Y138.389 E0.15201 F1500 G1 X155.4 Y140.4 E0.21889 F1500 G1 X155.4 Y180.619 E1.55657 F1500 G1 X94.6 Y180.619 E3.57879 F1500 G1 X94.6 Y133.819 E5.13536 F1500 G1 X148.644 Y133.819 E6.93289 F1500 G1 X150.709 Y133.819 E7.00154 F1500 G1 X152.398 Y133.819 E7.05772 F1500 G1 X153.711 Y133.819 E7.10141 F1500 G1 X154.649 Y133.819 E7.13261 F1500 G1 X155 Grogou-3-coul-dentifrice-by-Davop.zip
If this is a feature request describe it here
Please add canvas3d.io slicer support to wonderful Octolapse I need it to add colour to my prints but cannot then use octolapse. That would be much appreciated
Version of Octolapse
Octolapse Version: ___0.4.1
Version of OctoPrint
OctoPrint Version: ___1.6.1
When you ran into the problem, did you have diagnostic logging enabled?
Diagnostic Logging was Enabled: _REPLACE_THISYES_OR_NO
What were you doing when the problem occurred
What should have happened?
_REPLACE_THISPUT_YOUR_DESCRIPTION_HERE
What happened instead?
_REPLACE_THISPUT_YOUR_DESCRIPTION_HERE
Operating System running OctoPrint and Octolapse
OS Name: _REPLACE_THISOS_NAME_GOES_HERE Os Version: _REPLACE_THISOS_VERSION_GOES_HERE
Printer model & used firmware incl. version
Printer Model: _REPLACE_THISPRINTER_MODEL_GOES_HERE Printer Firmware Version: _REPLACE_THISPRINTER_FIRMWARE_VERSION_GOES_HERE
Browser and version of browser, operating system running browser
Browser: _REPLACE_THISBROWSER_VERSION_GOES_HERE Browser OS: _REPLACE_THISBROWSER_OS_GOES_HERE
Link to the gcode file you were printing when the problem occurred
Link to Gcode File: _REPLACE_THISGCODE_FILE_LINK_GOES_HERE
Link to settings.json
Link to settings.json with all passwords removed: _REPLACE_THISSETTINGS_JSON_LINK_GOES_HERE
Link to plugin_octolapse.log
Link to plugin_octolapse.log: LINK_GOES_HERE
Link to octoprint.log
Link to octoprint.log: _REPLACE_THISLINK_GOES_HERE
Link to contents of Javascript console in the browser
Link to javascript console output: _REPLACE_THISLINK_GOES_HERE
Screenshots and/or videos of the problem:
Screenshot/Video Links: _REPLACE_THISLINKs_GO_HERE
Please consider becoming a patron
If you like this project, please support my work by becoming a patron, and consider adding a 'star' to the repository. It takes a lot of time and effort to maintain the project and respond to issues. The cost of test prints, software, cameras, printer parts, etc. can quickly add up, so every bit helps.
You can find various videos and tutorials by subscribing to my Youtube channel. You can also follow me on Twitter.