search

FormerLurker / Octolapse

Stabilized timelapses for Octoprint
GNU Affero General Public License v3.0
634 stars 99 forks source link

File line number 10 was expected, but 8 was received! #776

Open boivinx7 opened 2 years ago

boivinx7 commented 2 years ago

If this is a feature request describe it here

Version of Octolapse

Octolapse Version: Octolapse 0.4.1 Master Branch from Plugin manager

Version of OctoPrint

OctoPrint Version: Version 1.7.0

When you ran into the problem, did you have diagnostic logging enabled?

Diagnostic Logging was Enabled: Yes

What were you doing when the problem occurred

  1. Start the print
  2. When print start : File line number 10 was expected, but 8 was received!
  3. Octolapse stops

What should have happened?

Octolapse not stoping

What happened instead?

Octolapse stoped

Operating System running OctoPrint and Octolapse

OS Name: OctoPi Os Version: 0.18.0

Printer model & used firmware incl. version

Printer Model: Biqu B1 Printer Firmware Version: Marlin 2.0.7.x

Browser and version of browser, operating system running browser

Browser: Chrome Browser OS: Windows 10

Link to the gcode file you were printing when the problem occurred

Link to Gcode File: https://mega.nz/file/r5s2HAYL#Gvc9QhtXTex1OMkFKb5oyKidwosS_09lK-u_0eKHaQM

Link to settings.json

Link to settings.json with all passwords removed: https://mega.nz/file/islQWYaY#7F8MJCqdaLGDVZh61NXjR94eKCzUZZuC_LNc8wK1oTo

Link to plugin_octolapse.log

Link to plugin_octolapse.log: https://pastebin.com/pc96mV9a

Link to octoprint.log

Link to octoprint.log: https://pastebin.com/taWAsmhr

Link to contents of Javascript console in the browser

Link to javascript console output: n/a

Screenshots and/or videos of the problem:

Screenshot/Video Links: n/a

Please consider becoming a patron

If you like this project, please support my work by becoming a patron, and consider adding a 'star' to the repository. It takes a lot of time and effort to maintain the project and respond to issues. The cost of test prints, software, cameras, printer parts, etc. can quickly add up, so every bit helps.

You can find various videos and tutorials by subscribing to my Youtube channel. You can also follow me on Twitter.

Vanixxx commented 2 years ago

For me it was the Tasmota plugin and the activation of M80 command to turn on and off via GCode. But I could not see in your case. See also: Case 503

boivinx7 commented 2 years ago

I do not have that plugin