[Request]

[mbell90]

If this is a feature request describe it here

can a profile for the Vyper be added under anycubic.

Version of Octolapse

Octolapse Version: _REPLACE_THISOCTOLAPSE_VERSION_GOES_HERE

Version of OctoPrint

OctoPrint Version: _REPLACE_THISOCTOPRINT_VERSION_GOES_HERE

When you ran into the problem, did you have diagnostic logging enabled?

Diagnostic Logging was Enabled: _REPLACE_THISYES_OR_NO

What were you doing when the problem occurred

1. _REPLACE_THISSTEP_ONE_GOES_HERE
2. _REPLACE_THISSTEP_TWO_GOES_HERE
3. _REPLACE_THISSTEP_...

What should have happened?

_REPLACE_THISPUT_YOUR_DESCRIPTION_HERE

What happened instead?

_REPLACE_THISPUT_YOUR_DESCRIPTION_HERE

Operating System running OctoPrint and Octolapse

OS Name: _REPLACE_THISOS_NAME_GOES_HERE Os Version: _REPLACE_THISOS_VERSION_GOES_HERE

Printer model & used firmware incl. version

Printer Model: _REPLACE_THISPRINTER_MODEL_GOES_HERE Printer Firmware Version: _REPLACE_THISPRINTER_FIRMWARE_VERSION_GOES_HERE

Browser and version of browser, operating system running browser

Browser: _REPLACE_THISBROWSER_VERSION_GOES_HERE Browser OS: _REPLACE_THISBROWSER_OS_GOES_HERE

Link to the gcode file you were printing when the problem occurred

Link to Gcode File: _REPLACE_THISGCODE_FILE_LINK_GOES_HERE

Link to settings.json

Link to settings.json with all passwords removed: _REPLACE_THISSETTINGS_JSON_LINK_GOES_HERE

Link to plugin_octolapse.log

Link to plugin_octolapse.log: LINK_GOES_HERE

Link to octoprint.log

Link to octoprint.log: _REPLACE_THISLINK_GOES_HERE

Link to contents of Javascript console in the browser

Link to javascript console output: _REPLACE_THISLINK_GOES_HERE

Screenshots and/or videos of the problem:

Screenshot/Video Links: _REPLACE_THISLINKs_GO_HERE

Please consider becoming a patron

If you like this project, please support my work by becoming a patron, and consider adding a 'star' to the repository. It takes a lot of time and effort to maintain the project and respond to issues. The cost of test prints, software, cameras, printer parts, etc. can quickly add up, so every bit helps.

You can find various videos and tutorials by subscribing to my Youtube channel. You can also follow me on Twitter.

[FormerLurker]

I recently received a Vyper, and will be adding a profile. When I get a test profile created, I'll post it here for you to try.

Sorry for the delay, been gone for a while due to some personal issues.

[mbell90]

No problem. I honestly forgot I made this request. I just new that loads of people were buying this and setting up the octopis

On Tue, Apr 26, 2022, 10:23 AM FormerLurker @.***> wrote:

I recently received a Vyper, and will be adding a profile. When I get a test profile created, I'll post it here for you to try.

Sorry for the delay, been gone for a while due to some personal issues.

— Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/827#issuecomment-1109862220, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMHA4FG2W2FB76R2UCDU2LLVG737TANCNFSM5PPQ4TDQ . You are receiving this because you authored the thread.Message ID: @.***>

[FormerLurker]

You didn't happen to get a profile working in the meantime, did you?

[mbell90]

I did. Modified the one for the mega i3 I think.

On Tue, Apr 26, 2022, 5:33 PM FormerLurker @.***> wrote:

You didn't happen to get a profile working in the meantime, did you?

— Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/827#issuecomment-1110270436, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMHA4FBGTDFW7UJSKJND7ALVHBOKFANCNFSM5PPQ4TDQ . You are receiving this because you authored the thread.Message ID: @.***>

[FormerLurker]

Would you be willing to export the profile and attach it? You can do that within the octolapse settings (download icon next to the profile).

On Tue, Apr 26, 2022, 5:26 PM mbell90 @.***> wrote:

I did. Modified the one for the mega i3 I think.

On Tue, Apr 26, 2022, 5:33 PM FormerLurker @.***> wrote:

You didn't happen to get a profile working in the meantime, did you?

— Reply to this email directly, view it on GitHub < https://github.com/FormerLurker/Octolapse/issues/827#issuecomment-1110270436 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AMHA4FBGTDFW7UJSKJND7ALVHBOKFANCNFSM5PPQ4TDQ

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/827#issuecomment-1110310238, or unsubscribe https://github.com/notifications/unsubscribe-auth/AH6RJOE5UCPZMPHOF3FYJFDVHBUQHANCNFSM5PPQ4TDQ . You are receiving this because you commented.Message ID: @.***>

[mbell90]

Sure. Not perfect tho. Has a bit of wabble I. The video output. But works. I'll try and send that tonight or tomorrow

On Tue, Apr 26, 2022, 6:28 PM FormerLurker @.***> wrote:

Would you be willing to export the profile and attach it? You can do that within the octolapse settings (download icon next to the profile).

On Tue, Apr 26, 2022, 5:26 PM mbell90 @.***> wrote:

I did. Modified the one for the mega i3 I think.

On Tue, Apr 26, 2022, 5:33 PM FormerLurker @.***> wrote:

You didn't happen to get a profile working in the meantime, did you?

— Reply to this email directly, view it on GitHub <

https://github.com/FormerLurker/Octolapse/issues/827#issuecomment-1110270436

, or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AMHA4FBGTDFW7UJSKJND7ALVHBOKFANCNFSM5PPQ4TDQ

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/FormerLurker/Octolapse/issues/827#issuecomment-1110310238 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AH6RJOE5UCPZMPHOF3FYJFDVHBUQHANCNFSM5PPQ4TDQ

. You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/827#issuecomment-1110311307, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMHA4FGGTCGS6BIPOQRW37DVHBUXFANCNFSM5PPQ4TDQ . You are receiving this because you authored the thread.Message ID: @.***>

[tomlilly]

Did a Vyper profile ever emerge from this?

[tomlilly]

Touching on this again, I modified the I3 Mega profile a bit and have a "working" Vyper profile. I couldn't get it to start correctly at the first layer but other than that it works well enough.

Unable to attach a .json file, so here are the contents for anyone who wants it.

AnycubicVyper.json

`{"version": "0.4.1", "settings_version": "0.4.0", "type": "Printer", "profile": {"name": "Anycubic - I3 Mega", "description": "Anycubic I3 Mega - Version 1.0", "guid": "5b67fbd3-3753-45dd-92db-5278df18e75a", "automatic_configuration": {"key_values": [{"name": "Anycubic", "value": "anycubic"}, {"name": "I3 Mega", "value": "i3_mega"}], "version": "1.2", "suppress_update_notification_version": false, "is_custom": true}, "has_been_saved_by_user": true, "slicer_type": "automatic", "gcode_generation_settings": {"vase_mode": null, "layer_height": null, "extruders": []}, "slicers": {"cura": {"slicer_type": "cura", "version": "unknown", "extruders": [{"version": null, "speed_z_hop": null, "max_feedrate_z_override": null, "retraction_amount": null, "retraction_hop": null, "retraction_hop_enabled": false, "retraction_enable": false, "retraction_speed": null, "retraction_retract_speed": null, "retraction_prime_speed": null, "speed_travel": null}], "axis_speed_display_settings": "mm-sec", "layer_height": null, "smooth_spiralized_contours": false, "machine_extruder_count": 1}, "simplify_3d": {"slicer_type": "simplify-3d", "version": "unknown", "extruders": [{"retraction_distance": null, "retraction_vertical_lift": null, "retraction_speed": null, "extruder_use_retract": false}], "x_y_axis_movement_speed": null, "z_axis_movement_speed": null, "spiral_vase_mode": false, "layer_height": null, "axis_speed_display_settings": "mm-min"}, "slic3r_pe": {"slicer_type": "slic3r-pe", "version": "unknown", "extruders": [{"retract_length": 6.0, "retract_lift": 0.075, "retract_speed": 40.0, "deretract_speed": 50.0}], "axis_speed_display_units": "mm-sec", "layer_height": 0.15, "spiral_vase": false, "travel_speed": 180}, "other": {"slicer_type": "other", "version": "unknown", "extruders": [{"retract_length": null, "z_hop": null, "retract_speed": null, "deretract_speed": null, "lift_when_retracted": false, "retract_before_move": false, "travel_speed": null, "z_travel_speed": null}], "speed_tolerance": 1, "axis_speed_display_units": "mm-min", "vase_mode": false, "layer_height": null}}, "suppress_snapshot_command_always": true, "auto_detect_position": true, "origin_type": "front_left", "home_x": null, "home_y": null, "home_z": null, "override_octoprint_profile_settings": true, "bed_type": "rectangular", "diameter_xy": 0.0, "width": 240.0, "depth": 240.0, "height": 260.0, "custom_bounding_box": false, "min_x": 0.0, "max_x": 210.0, "min_y": 0.0, "max_y": 210.0, "min_z": 0.0, "max_z": 205.0, "restrict_snapshot_area": false, "snapshot_diameter_xy": 0.0, "snapshot_min_x": 0.0, "snapshot_max_x": 0.0, "snapshot_min_y": 0.0, "snapshot_max_y": 0.0, "snapshot_min_z": 0.0, "snapshot_max_z": 0.0, "auto_position_detection_commands": "", "priming_height": 0.25, "minimum_layer_height": 0.05, "e_axis_default_mode": "absolute", "g90_influences_extruder": "true", "xyz_axes_default_mode": "absolute", "units_default": "millimeters", "axis_speed_display_units": "mm-min", "default_firmware_retractions": false, "default_firmware_retractions_zhop": false, "gocde_axis_compatibility_mode_enabled": true, "home_axis_gcode": "G90; Switch to Absolute XYZ\r\nG28 X Y; Home XY Axis", "num_extruders": 1, "shared_extruder": false, "zero_based_extruder": true, "extruder_offsets": [], "default_extruder": 1, "snapshot_command": "G4 P1"}}`

[mbell90]

I'm sorry. I kept forgetting..... :( If I'm able to I'll send the profile I was using.

On Mon, Jan 16, 2023, 8:22 AM tomlilly @.***> wrote:

Touching on this again, I modified the I3 Mega profile a bit and have a "working" Vyper profile. I couldn't get it to start correctly at the first layer but other than that it works well enough.

Unable to attach a .json file, so here are the contents for anyone who wants it. AnycubicVyper.json

{"version": "0.4.1", "settings_version": "0.4.0", "type": "Printer", "profile": {"name": "Anycubic - I3 Mega", "description": "Anycubic I3 Mega

• Version 1.0", "guid": "5b67fbd3-3753-45dd-92db-5278df18e75a", "automatic_configuration": {"key_values": [{"name": "Anycubic", "value": "anycubic"}, {"name": "I3 Mega", "value": "i3_mega"}], "version": "1.2", "suppress_update_notification_version": false, "is_custom": true}, "has_been_saved_by_user": true, "slicer_type": "automatic", "gcode_generation_settings": {"vase_mode": null, "layer_height": null, "extruders": []}, "slicers": {"cura": {"slicer_type": "cura", "version": "unknown", "extruders": [{"version": null, "speed_z_hop": null, "max_feedrate_z_override": null, "retraction_amount": null, "retraction_hop": null, "retraction_hop_enabled": false, "retraction_enable": false, "retraction_speed": null, "retraction_retract_speed": null, "retraction_prime_speed": null, "speed_travel": null}], "axis_speed_display_settings": "mm-sec", "layer_height": null, "smooth_spiralized_contours": false, "machine_extruder_count": 1}, "simplify_3d": {"slicer_type": "simplify-3d", "version": "unknown", "extruders": [{"retraction_distance": null, "retraction_vertical_lift": null, "retraction_speed": null, "extruder_use_retract": false}], "x_y_axis_movement_speed": null, "z_axis_movement_speed": null, "spiral_vase_mode": false, "layer_height": null, "axis_speed_display_settings": "mm-min"}, "slic3r_pe": {"slicer_type": "slic3r-pe", "version": "unknown", "extruders": [{"retract_length": 6.0, "retract_lift": 0.075, "retract_speed": 40.0, "deretract_speed": 50.0}], "axis_speed_display_units": "mm-sec", "layer_height": 0.15, "spiral_vase": false, "travel_speed": 180}, "other": {"slicer_type": "other", "version": "unknown", "extruders": [{"retract_length": null, "z_hop": null, "retract_speed": null, "deretract_speed": null, "lift_when_retracted": false, "retract_before_move": false, "travel_speed": null, "z_travel_speed": null}], "speed_tolerance": 1, "axis_speed_display_units": "mm-min", "vase_mode": false, "layer_height": null}}, "suppress_snapshot_command_always": true, "auto_detect_position": true, "origin_type": "front_left", "home_x": null, "home_y": null, "home_z": null, "override_octoprint_profile_settings": true, "bed_type": "rectangular", "diameter_xy": 0.0, "width": 240.0, "depth": 240.0, "height": 260.0, "custom_bounding_box": false, "min_x": 0.0, "max_x": 210.0, "min_y": 0.0, "max_y": 210.0, "min_z": 0.0, "max_z": 205.0, "restrict_snapshot_area": false, "snapshot_diameter_xy": 0.0, "snapshot_min_x": 0.0, "snapshot_max_x": 0.0, "snapshot_min_y": 0.0, "snapshot_max_y": 0.0, "snapshot_min_z": 0.0, "snapshot_max_z": 0.0, "auto_position_detection_commands": "", "priming_height": 0.25, "minimum_layer_height": 0.05, "e_axis_default_mode": "absolute", "g90_influences_extruder": "true", "xyz_axes_default_mode": "absolute", "units_default": "millimeters", "axis_speed_display_units": "mm-min", "default_firmware_retractions": false, "default_firmware_retractions_zhop": false, "gocde_axis_compatibility_mode_enabled": true, "home_axis_gcode": "G90; Switch to Absolute XYZ\r\nG28 X Y; Home XY Axis", "num_extruders": 1, "shared_extruder": false, "zero_based_extruder": true, "extruder_offsets": [], "default_extruder": 1, "snapshot_command": "G4 P1"}}

— Reply to this email directly, view it on GitHub https://github.com/FormerLurker/Octolapse/issues/827#issuecomment-1384055518, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMHA4FHCZLMUNL6BNGZ45CTWSVDQ3ANCNFSM5PPQ4TDQ . You are receiving this because you authored the thread.Message ID: @.***>

[tinanewtonart]

I am interested in the profile too