When you ran into the problem, did you have diagnostic logging enabled?
Diagnostic Logging was Enabled: YES
What were you doing when the problem occurred
Starting a print.
What should have happened?
Take a snapshot when encountering "@OCTOLAPSE TAKE-SNAPSHOT" in the G-code
What happened instead?
Encounters an error on the first snapshot and doesn't take it. All other snapshots seems to work, but never the first.
I get the popup:
Stabilization Error
An unexpected error was encountered while running the timelapse snapshot procedure.
The log says: "TypeError: '<' not supported between instances of 'NoneType' and 'float'"
Seems to have been an issue some time ago, I have tried reinstalling octoprint multiple times with no success.
Please consider becoming a patron
If you like this project, please support my work by becoming a patron, and consider adding a 'star' to the repository. It takes a lot of time and effort to maintain the project and respond to issues. The cost of test prints, software, cameras, printer parts, etc. can quickly add up, so every bit helps.
Version of Octolapse
Octolapse Version: 0.4.1
Version of OctoPrint
OctoPrint Version: 1.8.1
When you ran into the problem, did you have diagnostic logging enabled?
Diagnostic Logging was Enabled: YES
What were you doing when the problem occurred
Starting a print.
What should have happened?
Take a snapshot when encountering "@OCTOLAPSE TAKE-SNAPSHOT" in the G-code
What happened instead?
Encounters an error on the first snapshot and doesn't take it. All other snapshots seems to work, but never the first. I get the popup: Stabilization Error An unexpected error was encountered while running the timelapse snapshot procedure. The log says: "TypeError: '<' not supported between instances of 'NoneType' and 'float'"
Operating System running OctoPrint and Octolapse
OS Name: OctoPi Os Version: 0.18.0
Printer model & used firmware incl. version
Printer Model: Prusa MK3S+ Printer Firmware Version: 3.11.0-4955
Link to the gcode file you were printing when the problem occurred
Link to Gcode File: https://pastebin.com/H2wVKnfZ
Link to settings.json
Link to settings.json with all passwords removed: https://drive.google.com/file/d/1j_qFVo1DyS07PmzZECTPc8EckwFIu-EQ/view?usp=sharing
Link to plugin_octolapse.log
Link to plugin_octolapse.log: https://drive.google.com/file/d/1Zo9vWkA0-QqKsyL-rCS9X5-_eHCA696U/view?usp=sharing
Link to octoprint.log
Link to octoprint.log: https://drive.google.com/file/d/1NUjZTiTAJZ_YluKOr0p5boWRSG2jEMZa/view?usp=sharing
Seems to have been an issue some time ago, I have tried reinstalling octoprint multiple times with no success.
Please consider becoming a patron
If you like this project, please support my work by becoming a patron, and consider adding a 'star' to the repository. It takes a lot of time and effort to maintain the project and respond to issues. The cost of test prints, software, cameras, printer parts, etc. can quickly add up, so every bit helps.
You can find various videos and tutorials by subscribing to my Youtube channel. You can also follow me on Twitter.