search

Foxies-CSTL / Marlin_2.1.x

This repository, based on the work of the Marlin team, contains the source code and some firmware for the Deltas printers. This firmware is optimized for FLSun 3D printers based on the original 32-bit platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
http://marlinfw.org
GNU General Public License v3.0
104 stars 26 forks source link

[BUG] (U9CGgTmPULR32-Robin_mini (QQSP) missing Special_menuDelta) #16

Closed peeepeeepeee closed 1 year ago

peeepeeepeee commented 1 year ago

Did you test the latest bugfix-2.1.x code?

Yes, and the problem still exists.

Bug Description

Special Delta menu is missing on U9CGgTmPULR32-Robin_mini (QQSP) Just Flashed the mentioned version of Foxies Firmware, and cant get any Delta Leveling to work I hope I'm posting this in the right section... sorry if not... IMG_20230129_194247 IMG_20230129_194240

Bug Timeline

No response

Expected behavior

No response

Actual behavior

No response

Steps to Reproduce

No response

Version of Marlin Firmware

Marlin FLSunQ_2.1.1

Printer model

No response

Electronics

No response

Add-ons

No response

Bed Leveling

None

Your Slicer

None

Host Software

None

Don't forget to include

Additional information & file uploads

No response

Foxies-CSTL commented 1 year ago

U9CGgTmPULR32

This firmware implies that you have wired the TMC2209 in UART mode (4 wires) (option 'U9'), that you have modified the jumper under the stepper motor drivers and that you have also wired the DIAG pin of the TMC to the Signal pin of each EndStop (SENSORLESS: Homing/Probing: Option "g" and "G") . The STALLGUARD_2 function of the TMCs disables the "Special Delta" menu but all settings are available in the "advanced configuration" menu.