X12S on 1.4.3 with external Module R9M2019 rebooting Radio into emergency mode

[yak-54]

X12S on 1.4.3 with external Module R9M2019 Accst firmware FW-R9M-ACCST-20190117 FLEX firmware on the module also does it with IXJ module goes into emergency mode

i did set up radio before i power on the module in rf system for the as soon as i power on the module the radio goes in emergency and when in emergency mode the the IXJ module starts working i did put back on the radio Ethos 1.4.2 and all the modules work on this radio

https://youtu.be/s-vMcemYYMo

[bsongis-frsky]

You say IXJ, you mean XJT, right?

[yak-54]

You say IXJ, you mean XJT, right?

Yep sorry XJT and R9M 2019 late night lol

[bsongis-frsky]

I cannot reproduce this problem, but I think I have found something which is bad (stack overflow in interrupt) and I fixed it for 1.4.4 May I ask you to give a try to binary I will upload in 1.4.4 pre-release?

[yak-54]

yes i will test no problems at all i will shoot you an email

[yak-54]

I cannot reproduce this problem, but I think I have found something which is bad (stack overflow in interrupt) and I fixed it for 1.4.4 May I ask you to give a try to binary I will upload in 1.4.4 pre-release?

tested with R9M and the XJT work like a Charm :)

Thank you

[bsongis-frsky]

Thanks for your help! It was a severe issue, I really recommend to install 1.4.4 on all Horus radios

[yak-54]

new issue #2160