search

FrSkyRC / ETHOS-Feedback-Community

Feedback & suggestions are welcomed here for ETHOS by FrSky
188 stars 85 forks source link

Emergency message using nano tx crsf module #2190

Closed Holypug closed 1 year ago

Holypug commented 1 year ago

Hi everyone. I am new in fpv and i own a new x18s . Everything is updated to latest and is ok. I try to copy the lua script to the sd card but is not working. Only if i copy on the internal memory of the radio it display the external module option. I bind a quad, and few seconds later the radio went to emergency mode and no shut down pressing the power button. What i am doing wrong? Thanks for help

Holypug commented 1 year ago

It work only if scripts folder is in Nand drive. Sd card won't work even if selected as primary source for folders.

Target0815 commented 1 year ago

You should leave the scripts folder on the NAND drive. This is provided for the X18S.

Then create a folder "crossfire" below "scripts" and copy the main.lua into it. Then restart the transmitter so that the script is loaded.

I also use the Crossfire Nano TX with the X18S mit Ethos 1.4.4. Which Ethos version do you have installed?

P.S. there is no "crsf module", but a Crossfire module which uses the CRSF protocol.

Holypug commented 1 year ago

Thanks. In fact it work only on the NAND drive. Look like the sd card is a " problem " on my radio. It is also slow to show on pc. Something strange about sd functionality. Even if i select the sd card as primary folder on the setting option won't work.

Holypug commented 1 year ago

Ethos 1.4.4 latest version. Everything is updated