No Frsky Passthrough on external module bay X12S

[yak-54]

No Frsky Sport Passthrough on external module bay X12S

the internal ISRM 2.4 works Great with frsky Passthrough

but on the external bay with R9M no sport data i cant get any Sensors

But the same setup with R9m i tested with openTX as well its just to check the hardware was working

this all the sensors i get

[bsongis-frsky]

Closed on purpose?

[yak-54]

I though after opening the issues it it may of been an script error on my behalf so i closed it so there is no passthrough external module ?

[bsongis-frsky]

Yes it has been implemented in 1.4.5 I have just forgotten to write it in the Release Notes

[yak-54]

Thanks Again Bertrand

[yak-54]

it this in the latest new pre release 27/12/22 ?

[bsongis-frsky]

Yes, it should

[yak-54]

still no joy cant get it to work on the external module bay under ethos 1.4.5 this is the same radio on edgetx same hardware works fine

[yak-54]

I have test it on 2 X12S and it does not work i tested it all hardware under edgetx works fine with a R9M and R9 receiver ethos 1.4.5 not working XJT and RX8R not working but if i turn off the extural module bay turn on the ISRM in D16 the RX8R works fine

[hyperion11]

same problem with Twin X Lite and R9M Lite Pro Access. Have try with R9Slim+OTA and R9mm receivers. No telemetry. TW MX and R-XSR telemetry working

[yak-54]

yep not working on 1.4.7 on X12s as well yet

[hyperion11]

@bsongis-frsky Is there any information about when this feature will work? Very necessary.

[bsongis-frsky]

I am not sure it is an Ethos issue, or a Yaapu issue!

[bsongis-frsky]

Email sent to Yaapu

[hyperion11]

internal module work with Yaapu in TW and access X modes

[yak-54]

internal module work with Yaapu in TW and access X modes

yep it works with 2.4 internal ISRM module fine just not with any module in the module bay tried R9M 2019 and R9M accst fcc and flex R9 fcc and flex on accst and and XJT module with an rx8r

[hyperion11]

any news?

[hyperion11]

hello @bsongis-frsky any news about this problem?

[Zadrob]

Hello, I confirm the same behavior on Tandem XE. Yaapu script works fine on internal module. No telemetry (passthrough) from external module. I can see any other sensors from external module (rssi, voltage, Li-Po (FLVSS), even GPS which comes from Ardupilot). Yaapu script can see RSSI, LiPo voltage, but no passthrough data. I am thinking to try temporary solution - maybe adding 2.4G receiver just for telemetry link a linking it to internal module.

[hyperion11]

@bsongis-frsky when you fix this problem?

[nightfury24]

Well that’s interesting. Few days ago I open the issue and the developer closed it, stating report to yappu, it’s a lua script issue.

[github-actions[bot]]

This issue is stale because it has been open 90 days with no activity. Remove stale label or comment or this will be closed in 30 days.

[hyperion11]

when it will be fixed?

[martan223]

i have the same problem on Horus X10 express, iternal module + X8r works flawlessly, r9m + r9 slim does not (stock sport telemetry works tho). i even tried modify the lua script to have ability to change temeletry source to "external sport", no success.

[hyperion11]

https://github.com/yaapu/FrskyTelemetryScript/issues/222#issuecomment-1796188990 so this is not ethos issue

[yak-54]

this issues is on the way to be fixed have tested works with R9m on flex on ethos 1.4.13 this is not ethos issue