search

FrSkyRC / ETHOS-Feedback-Community

Feedback & suggestions are welcomed here for ETHOS by FrSky
189 stars 85 forks source link

Frsky ESC and telemetry doesn’t work for neuron II 80a after update. #3098

Closed Eduardoesteban1694 closed 10 months ago

Eduardoesteban1694 commented 11 months ago

I updated tx x18s to ethos 1.4.14 and rx TD-R10 to the latest firmware and the lua tool for Frsky ESC stopped working. Telemetry also stopped working, only works for a few seconds and o get “sensor lost” alarm. I downgraded the rx to 1.0.9 and telemetry seems to work, but when I open Frsky ESC lua app I got “sensor lost” again and telemetry never recover until I disconnect and connect the battery.

mawzthefinn commented 11 months ago

Did you update your TD ISRM to 2.2.6?

The latest TD receiver firmware wants the latest TD ISRM Firmware.

Eduardoesteban1694 commented 11 months ago

Yes, I updated but it worked worst so I downgraded it to 2.2.2 and it worked, not correctly, but better than with the latest version.

Another issue that I found is that with version 2.2.6, when discovering sensors, some appear even when the receiver is turned off, for example one appears to me that says "R9M power" and a value of 10db

mawzthefinn commented 11 months ago

R9M power is telemetry from the RF Module and should be present whenever the 900M section is powered on.

Eduardoesteban1694 commented 11 months ago

@mawzthefinn thanks, I updated TD-ISRM to 2.2.6 and TD-R10 to 1.0.11, telemetry worked, but I still have the issue that I only can enter to Frsky ESC lua once. If I go out and re enter to the app, I can´t configure nothing and also if I enter to Frsky ESC lua I automatically lost all sensors of Neuron ESC, I have to unplugg and plugg de battery to recover sensors because it doesn´t recover. It doesn´t happen before the update so I don´t remember what versions I had, only remembrer that I have never update TD-ISRM firmware so I assume that I had 2.2.2

Eduardoesteban1694 commented 11 months ago

@mawzthefinn Could it be that it is an incompatibility error of the Frsky ESC script?

mawzthefinn commented 10 months ago

There's an updated script here:

https://www.rcgroups.com/forums/showatt.php?attachmentid=17838339&d=1701765481

And a recommendation to update to ETHOS 1.4.15 as well

Eduardoesteban1694 commented 10 months ago

@mawzthefinn Thanks!, It works perfect. Problem Solved!