The maximum voltage for ISRM sensor ID 0A 0B50 is only 50.00v, which causes problems with a fully charged 12S LiHV setup (and sometimes even full charged 12S LiPo).
Same issue with the CRSF/ELRS Rx Batt voltage sensor (ID 08 in my models), except it is limited to 50.4v.
These limits should be at least 61 volts to accommodate up to 14S LiHv. Probably slightly higher for sensors that are not calibrated perfectly. I see some other voltage sensor IDs have 65v and 100v as limits.
Ethos 1.4.17. Have not checked 1.5.0-RC3 yet.
The maximum voltage for ISRM sensor ID
0A 0B50
is only 50.00v, which causes problems with a fully charged 12S LiHV setup (and sometimes even full charged 12S LiPo).Same issue with the CRSF/ELRS Rx Batt voltage sensor (ID
08
in my models), except it is limited to 50.4v.These limits should be at least 61 volts to accommodate up to 14S LiHv. Probably slightly higher for sensors that are not calibrated perfectly. I see some other voltage sensor IDs have 65v and 100v as limits.