search

FrSkyRC / ETHOS-Feedback-Community

Feedback & suggestions are welcomed here for ETHOS by FrSky
188 stars 85 forks source link

flysky telemetry temp & magnet rpm #3686

Open doubleO00 opened 6 months ago

doubleO00 commented 6 months ago

Please add Flysky Telemetry sensors

Temperature sensor FS-CTM01, RPM sensor FS-CPD01, to Telemetry.

I am using Flysky FS-iA10 receiver and the voltage sensor FS-CVT01 is found and works, would greatly appreciate these other 2 sensors working

robertobrazill commented 6 months ago

Do you use the rpm sensor on a gasoline engine? What engine exactly?

doubleO00 commented 6 months ago

Do you use the rpm sensor on a gasoline engine? What engine exactly?

I use the FlySky rpm sensors on all my gasoline engines ie DLE 111, RCGF 70 Twin, RCGF 40Twin DLE 20, I mount the pick up sensor next to the engines ignition sensor and use the same magnet on the prop hub as the ignition sensor for reading the rpm.

I also mount the temp sensors with high temp rtv in-between 2 fins on the engine cylinders to get my temperatures, and I then can adjust my cowl ducts to get even temps on twin cylinders

robertobrazill commented 6 months ago

So this Flysky sensor is working perfectly, just put discover new sensors on the FRSKY and it finds them?

doubleO00 commented 6 months ago

So this Flysky sensor is working perfectly, just put discover new sensors on the FRSKY and it finds them?

No !

Only external voltage sensor works, I am asking them to please get temperature and rmp sensors to work.

But I am using Flysky receivers with RadioMaster TX16S on Edgetx 2.9.4 and all sensors are found and work, voltage, temperature, and rpm.

I want to switch everything over to my FrSky X20S but will wait for sensors to work as I need them on all my airplanes