search

FrSkyRC / ETHOS-Feedback-Community

Feedback & suggestions are welcomed here for ETHOS by FrSky
180 stars 83 forks source link

"No SD Card" message on X20s at boot time #3751

Open azaz44 opened 3 months ago

azaz44 commented 3 months ago

If I press and hold Power button on my X20s and release it too quickly, I get "No SD Card" message. I can reproduce it relatively easy, just try to hold the button and release it relatively quickly, before screen goes on, but long enough so radio does something. Should be able to get it after a couple of tries.

I have a feeling it it was introduced with some version, probably a couple months ago. Issue definitely is there in latest 1.4.x and also is there with 1.5.2.

Not crazy critical, as I haven't seen any SD card errors while running. But if you don't know it is some boot time issue at first, it looks scary and might get you go back home without doing any flying and buy a new SD card.

ajatmiddday commented 3 months ago

I had the same problem on my Horus x12s. The load times got longer, some times it would not load & would report no SD card. It took a new SD card to fix the problem. Looking at the date of production (2016) for the transmitter & if this was the original card 8 years of updates OTX & Ethoes took it's toll

azaz44 commented 3 months ago

I had the same problem on my Horus x12s. The load times got longer, some times it would not load & would report no SD card. It took a new SD card to fix the problem. Looking at the date of production (2016) for the transmitter & if this was the original card 8 years of updates OTX & Ethoes took it's toll

I think what you describe is just bad SD card?

github-actions[bot] commented 2 weeks ago

This issue is stale because it has been open 90 days with no activity. Remove stale label or comment or this will be closed in 30 days.

azaz44 commented 2 weeks ago

Still valid