Blackbox Data / Flight Data Record Incorrect Data

[frskyrc-ben]

TANDEM X18 SE ETHOS 1.5.9 TD-ISRM 2.2.6 ARCHER Plus SR8 1.0.10

When viewing the Blackbox data \ Flight Data Record, it is incorrectly showing RX Battery Voltage as ~13V, when the telemetry indicates the RXBattery is ~5V

The VFR Min shows 0% so it's catching the startup value when the receiver is first powered up. This gives a junk data since you will not know what the true VFR Min was during the flight.

Additionally, the same ARCHER Plus SR8 shows No data in Flight Data record with X20 series radios: tested with X20S , X20 RS and X20 PRO

TANDEM X20 RS ETHOS 1.5.9 TD-ISRM 1.0.13

TANDEM X20 PRO ETHOS 1.5.9 TD-ISRM 1.0.13

[Wolepo]

The Archer Plus SR8 does not have a black box, even if it says so in the manual.

[Nicholas-Luoyi]

X20R(S) and X20PRO have an issue in the RF module. The firmware will be updated soon

[frskyrc-ben]

Hi Nicholas thank you. So just a couple questions for confirmation :

1) So you can confirm that ARCHER Plus SR8 DOES support black box function?

2) This issue was also noticed with X20S (no flight data record info displayed) -- Does the RF issue also affect X20(S) series then?

3) Any thoughts about the incorrect flight data record info with X18SE ? For ex. it shows RX Battery as ~13V while the telemetry indicates it is ~5V

[Nicholas-Luoyi]

1 -> Yes 2 -> I think X20(S) should not be affected 2 and 3 -> We are still investigating them

[Wolepo]

With the X10S Express there is also no access to the black box

[Nicholas-Luoyi]

3 -> Confirmed as well. Will have a update for the receiver