search

FrSkyRC / ETHOS-Feedback-Community

Feedback & suggestions are welcomed here for ETHOS by FrSky
190 stars 85 forks source link

Twin X14 #4379

Open 10KPP opened 2 months ago

10KPP commented 2 months ago

Hello, is it possible to set the trim for the throttle to Pot2?

mawzthefinn commented 2 months ago

Yes, but it's a bit of a weird workaround. There's no way to directly set the trim, but if you do the following, you will get trim on Pot2 with the same behaviour as low position trim in the throttle. This requires ETHOS 1.5 or later

  1. Create a Free Mix, name it Throttle Trim, source is Pot2, Output is CH64
  2. Add a curve action to the Free Mix, edit the curve, name it Throttle Trim, set it to 2 points, set the points to -100 and -50
  3. Add a curve to your throttle mix, name it Throttle, set to 2 points, set point 2 to 100, long-press point 1, select 'use a source', select Channels->Ch64

You now have low position trim on the throttle,.

10KPP commented 2 months ago

Perfect, thank you.

BladeScraper-Designs commented 2 months ago

https://github.com/FrSkyRC/ETHOS-Feedback-Community/issues/4101