search

FrSkyRC / ETHOS-Feedback-Community

Feedback & suggestions are welcomed here for ETHOS by FrSky
191 stars 85 forks source link

Error in the current new ELRS script “Switch Mode” 1.5.13 #4424

Closed yak55 closed 2 months ago

yak55 commented 2 months ago

Error in the current new ELRS script “Switch Mode”

Tested with Tandem XE and Vantac 1.5.13 as well as X20S and Radiomaster Ranger Nano 1.5.13

If the switch mode is changed, in my example from 8ch to 12ch Mixed or 16ch Rate /2, the setting is not saved and also not activated.

Greetings Eugen

Bild 1 + 3

Begin

Bild 2

Switch Mode changed and saved

Bild 1 + 3

configuration called again

robthomson commented 2 months ago

What version of elrs have you got installed?

Nothing has changed lua wise in this regard so trying to see why this would be the case.

robthomson commented 2 months ago

I have just tested this and it works perfectly?

https://www.youtube.com/watch?v=6ChyTdvoees

yak55 commented 2 months ago

Hello Rob, ELRS Version is 3.4.3.0

robthomson commented 2 months ago

Thanks. Will test against that.

yak55 commented 2 months ago

It is the EU LBT version Germany

Eugen

yak55 commented 2 months ago

Hi Rob, now it has worked once. But then the following display:

Greetings Eugen

Fehler

robthomson commented 2 months ago

Can you please open the file main.lua

And set the flag to use compiling to false?

yak55 commented 2 months ago

Hello Rob, now I can reproduce the mistake. NO CONNECTION ! to receiver - script function ok.

Transmitter connected with receiver - no function of script.

Maybe it’s helpful for you.

Eugen

robthomson commented 2 months ago

I have an x10 now and will test function works as expected.

Worth noting.. bladescraper has tested already and found function works on the x10.

If I find mine also works, it will be looking more like a local / hardware issue on your end.

Will find out by early next week.

yak55 commented 2 months ago

That would be strange, X20S and Tandem XE, Vantac and Radiomaster Ranger Nano would have to be defective at the same time.

That would be a great coincidence.

Please be sure to test with the receiver bound. This is the reason why I get the errors.

I now simply leave the receiver off, set everything on the transmitter - then supply the receiver with power - this is how it works with both transmitters and with both modules.

Greetings Eugen

yak55 commented 2 months ago

Hi Rob, thanks for your efforts. I looked further and just found the solution in the ELRS description.

Your script is ok.

Greetings Eugen

IMG_6521