search

FrSkyRC / RF_Feedback_Group

Regarding to the RF issues.
1 stars 0 forks source link

Power switch LUA and telemetry failure #38

Open mainstreetexpress opened 3 months ago

mainstreetexpress commented 3 months ago

I was about to use a power switch setup using the LUA script with telemetry. The power switch is connected to pin 18 as FBUS on my TD R18 RX running v1.0.12 firmware. Initially the LUA script sees the power switch and I can adjust the voltage to 8.4V. Then a few issues arise; telemetry will be lost or be completely removed after about 10 seconds, if I restart the power switch, it will go back to 5V and also connectivity is lost between the LUA script and the power switch. I have tried this on Ethos 1.5.9-1.5.13 running the LUA script from here https://www.frsky-rc.com/wp-content/uploads/Downloads/TOOL/PowerSwitch/Power%20Switch.zip

TX is an X20S

bsongis-frsky commented 2 months ago

I don't think it's an Ethos issue, feel free to reassign it to Ethos if I am wrong!

mainstreetexpress commented 2 months ago

So how does it progress if there is a comms issue between the power switch and the TX/RX?