Power Consumption

[JohnAZoidberg]

• [ ] Investigate if CORTEX_ENABLE_WFI_IDLE=TRUE should be enabled: https://github.com/qmk/qmk_firmware/blob/master/keyboards/ergodox_stm32/rules.mk#L19
• [ ] The firmware should enter a low power state when the keyboard is idle after 1 minute in S0 as detected by SLEEP# is high.
• [ ] When SLEEP# is low, (System is not in S0) the firmware should reduce the keyscan rate to 5hz and enter the lowest power state that allows interrupt/timer/usb based wake. Clocks should be gated where possible USB should enter D2.
• [x] Turn off RGB and backlight when in suspend
• [ ] Disable mux in suspend
• [x] Disable RGB controller in suspend
• [ ] Set #define USB_MAX_POWER_CONSUMPTION 500
• [ ] Currently ANSI RGB and non RGB use the same FW. Should probably disable i2c communication with LED matrix controller when it's not there.

[github-actions[bot]]

This issue has been automatically marked as stale because it has not had activity in the last 90 days. It will be closed in the next 30 days unless it is tagged properly or other activity occurs. For maintainers: Please label with bug, in progress, on hold, discussion or to do to prevent the issue from being re-flagged.

[github-actions[bot]]

This issue has been automatically closed because it has not had activity in the last 30 days. If this issue is still valid, re-open the issue and let us know. // [stale-action-closed]

[github-actions[bot]]

This issue has been automatically marked as stale because it has not had activity in the last 90 days. It will be closed in the next 30 days unless it is tagged properly or other activity occurs. For maintainers: Please label with bug, in progress, on hold, discussion or to do to prevent the issue from being re-flagged.

[github-actions[bot]]

This issue has been automatically closed because it has not had activity in the last 30 days. If this issue is still valid, re-open the issue and let us know. // [stale-action-closed]