search

Fredrum / chiaki

Raspberry Pi fork of the Free and Open Source PS4 and PS5 Remote Play client Chiaki.
https://github.com/Fredrum/chiaki/wiki/rpi02---branch-for-Bullseye,-64bit,-h265-and-kmsdrm
GNU Affero General Public License v3.0
68 stars 11 forks source link

Couldn't open settings file? #35

Open UnluckyForSome opened 2 years ago

UnluckyForSome commented 2 years ago

Hi! I have a situation where it seems no config file ever gets created, and every time I load the app I have to re-register my console. When the console connects I get an AVERROR (EAGAIN) but i'm hoping that's because it's not loading anything out of the settings file.

I'm trying to do this on a Raspberry Pi Zero W (1st version), with chiaki rpi02 edition (I have raspbian bullseye installed)

Below is my output, note how it's trying to load a settings file which I don't think exists?

pi@chiaki:~/chiaki-rpi/build $ sudo rpi/chiaki-rpi Linux base Path: /home/pi/chiaki-rpi/build/rpi/chiaki-rpi▒▒▒\▒▒▒ WARNING: h265 Decoder Not Detected SDL version linked: 2.0.20 error: XDG_RUNTIME_DIR not set in the environment. Disp Mode: 1920x1080 @ 60hz SDL_VIDEO_DRIVER selected: KMSDRM SDL_RENDER_DRIVER selected: opengles2 Running under X11: 0 INFO: Audio device 0: vc4-hdmi, MAI PCM i2s-hifi-0 Rpi IO created END HostInit Gamepads currently attached: 0 Check the gamepad is properly connected Will try to read rpi settings file: /home/root/.config/Chiaki/Chiaki_rpi.conf Couldn't open the settings file Discovery Service started GL_VERSION : OpenGL ES 2.0 Mesa 20.3.5 GL_RENDERER : VC4 V3D 2.1 Discovered Host State: ready No Hosts found in file Could not open directory: /home/root/.config/Chiaki Gui init done

Fredrum commented 2 years ago

Hmm ok are you running this as root? How did you start/run Chiaki? EDIT: I see you start with 'sudo' could you please try without?

Do you have a folder like, /home/root/.config/ ?

If not how much of that path do you have?

Fredrum commented 2 years ago

I also see that you're getting an error, error: XDG_RUNTIME_DIR not set in the environment

I've never tried this with the older Pi Zero W so not sure if it has to do with that or just something else. I haven't seen that error before.

troed commented 1 year ago

I might have a similar issue. I did create the .config/Chiaki folder manually after seeing the error, but there's still no settings file created whatever I do. All file/folder permissions are correct.

I do have both a PS4 Pro and PS5 on the network, if that's cause for concern. I'm unable to register any of them, it seems when I try to register the PS5 Chiaki tries using the PS4 method and vice versa ... but all that could be the results of the settings file I guess.

(I don't have the XDG_RUNTIME_DIR comment)

Linux base Path: /home/pi/chiaki-rpi/build/rpi/chiaki-rpi���pi�� h265 Hardware Decoder Detected SDL version linked: 2.0.22 Running in Desktop mode: 0 Disp Mode: 1920x1080 @ 60hz AUDIO DEVICE COUNT: 2 SDL_VIDEO_DRIVER selected: KMSDRM SDL_RENDER_DRIVER selected: opengles2 Rpi IO created END HostInit Gamepads currently attached: 1 Controller is: 8BitDo SN30 Pro Will try to read rpi settings file: /home/pi/.config/Chiaki/Chiaki_rpi.conf Couldn't open the settings file Discovery Service started GL_VERSION : OpenGL ES 3.1 Mesa 19.3.2 GL_RENDERER : V3D 4.2 Gui init done Gamepad added Controller is: 8BitDo SN30 Pro Discovered Host State: ready Is PS5: 0 No Hosts found in file Discovered Host State: ready Is PS5: 0 No Hosts found in file

Fredrum commented 1 year ago

Hi unfortunately I don't have the bandwidth to work on this project any more. I'd reccommend trying disconnecting one of your PS's and then restarting Chiaki and see if that helps.

One can actually have two PS's set up by using the 'remote' functionality and pretending that the secondary PS is remote even though it isn't. That lets you have two sets of setting prefs.

But of course you still need to get the basics working first.