Hey guys i have a slight problem
Flashed Bluepill 1 with the freejoy firmware, no problem, starting setting up my race sim pedals in the Freejoy Config Util.
So i decided to flash the 2nd Bluepill and get it ready for the next project.
Seemed to flash fine. But when i load up FreeJoy Config, the Blue pill doesn't show up, at all.
In the Application log window all it says is "Firmware warning"
I have tried all the different versions of the firmware and the config utils. Still nothing.
I went as far as testing the Pill in IDE just programming the basic blink sketch. Works fine.
I checked to make sure it had the proper resistors. No issues there. Checked to make sure the USB connection was soldered correctly.
Tried different USB cables.
Hooked it up to the other computer. No go.
I'm at a loss to what the issue could be.
Any help would be greatly appreciated
TomHVR
commented
3 months ago
Hey guys i have a slight problem Flashed Bluepill 1 with the freejoy firmware, no problem, starting setting up my race sim pedals in the Freejoy Config Util.
So i decided to flash the 2nd Bluepill and get it ready for the next project. Seemed to flash fine. But when i load up FreeJoy Config, the Blue pill doesn't show up, at all. In the Application log window all it says is "Firmware warning" I have tried all the different versions of the firmware and the config utils. Still nothing.
I went as far as testing the Pill in IDE just programming the basic blink sketch. Works fine. I checked to make sure it had the proper resistors. No issues there. Checked to make sure the USB connection was soldered correctly. Tried different USB cables. Hooked it up to the other computer. No go. I'm at a loss to what the issue could be. Any help would be greatly appreciated