Ansible Failing on Rpi4 to install FTS 2.0

[wabash2]

Below is the error that I am getting with trying to run Ansible. I have had previous success running the zero touch install on previous version of FTS. Any help would be greatly appreciated.

* fatal: [localhost]: FAILED! => {"changed": false, "cmd": ["/usr/bin/pip3", "install", "FreeTAKServer==2.0.66"], "msg": "stdout: Collecting FreeTAKServer==2.0.66\n Using cached FreeTAKServer-2.0.66-py3-none-any.whl (1.1 MB)\nCollecting python-socketio==4.6.0\n Using cached python_socketio-4.6.0-py2.py3-none-any.whl (51 kB)\nCollecting psutil==5.9.4\n Using cached psutil-5.9.4.tar.gz (485 kB)\n Installing build dependencies: started\n Installing build dependencies: finished with status 'done'\n Getting requirements to build wheel: started\n Getting requirements to build wheel: finished with status 'done'\n Preparing metadata (pyproject.toml): started\n Preparing metadata (pyproject.toml): finished with status 'done'\nCollecting SQLAlchemy==1.3.20\n Downloading SQLAlchemy-1.3.20.tar.gz (6.3 MB)\n ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.3/6.3 MB 9.4 MB/s eta 0:00:00\n Preparing metadata (setup.py): started\n Preparing metadata (setup.py): finished with status 'done'\nCollecting bcrypt==3.1.7\n Using cached bcrypt-3.1.7.tar.gz (42 kB)\n Installing build dependencies: started\n Installing build dependencies: finished with status 'error'\n\n:stderr: error: subprocess-exited-with-error\n \n × pip subprocess to install build dependencies did not run successfully.\n │ exit code: 1\n ╰─> [116 lines of output]\n Collecting setuptools>=40.8.0\n Using cached setuptools-67.8.0-py3-none-any.whl (1.1 MB)\n Collecting wheel\n Using cached wheel-0.40.0-py3-none-any.whl (64 kB)\n Collecting cffi>=1.1\n Using cached cffi-1.15.1.tar.gz (508 kB)\n Preparing metadata (setup.py): started\n Preparing metadata (setup.py): finished with status 'done'\n Collecting pycparser\n Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB)\n Building wheels for collected packages: cffi\n Building wheel for cffi (setup.py): started\n Building wheel for cffi (setup.py): finished with status 'error'\n error: subprocess-exited-with-error\n \n × python setup.py bdist_wheel did not run successfully.\n │ exit code: 1\n ╰─> [36 lines of output]\n running bdist_wheel\n running build\n running build_py\n creating build\n creating build/lib.linux-armv7l-3.11\n creating build/lib.linux-armv7l-3.11/cffi\n copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/verifier.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/lock.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/model.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/commontypes.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/recompiler.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/api.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/init.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/cparser.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/error.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/_embedding.h -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.11/cffi\n running build_ext\n building '_cffi_backend' extension\n creating build/temp.linux-armv7l-3.11\n creating build/temp.linux-armv7l-3.11/c\n arm-linux-gnueabihf-gcc -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DFFI_BUILDING=1 -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.11 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.11/c/_cffi_backend.o\n c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory\n 2 | #include \n | ^~~~\n compilation terminated.\n error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1\n [end of output]\n \n note: This error originates from a subprocess, and is likely not a problem with pip.\n ERROR: Failed building wheel for cffi\n Running setup.py clean for cffi\n Failed to build cffi\n Installing collected packages: wheel, setuptools, pycparser, cffi\n Running setup.py install for cffi: started\n Running setup.py install for cffi: finished with status 'error'\n error: subprocess-exited-with-error\n \n × Running setup.py install for cffi did not run successfully.\n │ exit code: 1\n ╰─> [38 lines of output]\n running install\n /usr/lib/python3/dist-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.\n warnings.warn(\n running build\n running build_py\n creating build\n creating build/lib.linux-armv7l-3.11\n creating build/lib.linux-armv7l-3.11/cffi\n copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/verifier.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/lock.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/model.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/commontypes.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/recompiler.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/api.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/init.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/cparser.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/error.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/_embedding.h -> build/lib.linux-armv7l-3.11/cffi\n copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.11/cffi\n running build_ext\n building '_cffi_backend' extension\n creating build/temp.linux-armv7l-3.11\n creating build/temp.linux-armv7l-3.11/c\n arm-linux-gnueabihf-gcc -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DFFI_BUILDING=1 -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.11 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.11/c/_cffi_backend.o\n c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory\n 2 | #include \n | ^~~~\n compilation terminated.\n error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1\n [end of output]\n \n note: This error originates from a subprocess, and is likely not a problem with pip.\n error: legacy-install-failure\n \n × Encountered error while trying to install package.\n ╰─> cffi\n \n note: This is an issue with the package mentioned above, not pip.\n hint: See above for output from the failure.\n [end of output]\n \n note: This error originates from a subprocess, and is likely not a problem with pip.\nerror: subprocess-exited-with-error\n\n× pip subprocess to install build dependencies did not run successfully.\n│ exit code: 1\n╰─> See above for output.\n\nnote: This error originates from a subprocess, and is likely not a problem with pip.\n"}

[brothercorvo]

moved to the proper project

[brothercorvo]

We are aware of this issue that only happens with the Raspberry Pi. We will fix this after release 2.1

[brothercorvo]

update: the issue is that in Ubuntu 22.04 python 3.10 is installed with the python dev-tools for that version using

sudo apt-get install python3.11-dev

you install the correct version and the you can

python3 -m pip install psutil

this will install psutil. after that you can re-run the Zero Touch or use Pip for installation

[phreed]

I am working on correcting this problem in a fork. The PR will be forthcoming.

[phreed]

Should the change also include logic to not stop when there are failing optional components?