FreeYourStream / freedeck-hardware

all the stuff you need to build your own FreeDeck
Other
747 stars 51 forks source link

rough technical drawing #4

Closed hanswurstgmbh closed 4 years ago

hanswurstgmbh commented 4 years ago

It would be nice to have a rough sketch with the distances drawn on it. So a simple rough sketch similar to a technical drawing. So we could create a rough design for a housing in a cad software to be able to print it later directly in 3d.

Thanks!

koriwi commented 4 years ago

https://github.com/koriwi/freedeck-hardware/blob/master/3x2/pcb/pdf/freedeck%203x2_etch_silk_top.pdf

koriwi commented 4 years ago

https://github.com/koriwi/freedeck-hardware/blob/master/3x2/pcb/pdf/freedeck%203x2_etch_silk_bottom_mirror.pdf

koriwi commented 4 years ago

these should be enough :)

koriwi commented 4 years ago

https://github.com/koriwi/freedeck-hardware/pull/6

koriwi commented 4 years ago

https://github.com/koriwi/freedeck-hardware/tree/master/3x2/3d/step

hanswurstgmbh commented 4 years ago

i could not open the stp file and the pdfs do not have the distances, so it will be difficult to make something. But the case you designed is already very nice

koriwi commented 4 years ago

tested it in this online viewer and it works fine. https://www.emachineshop.com/free-online-step-file-viewer/ you can use the pdf and scale it by the holes in the pcb. one hole is 1/10th of and inch thank you. i ordered pcb at jlcpcb. when they arrive i will print the case and test the fit. when the pcb arrive, tell me where you live and i will send you one.