This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.19.0 or ~0.19.0. See npm's documentation about semver for more information.
This time there is only one breaking change, and it only matters for people using Deno. Deno tests that use esbuild will now fail unless you make the change described below.
Work around API deprecations in Deno 1.40.x (#3609, #3611)
Deno 1.40.0 was just released and introduced run-time warnings about certain APIs that esbuild uses. With this release, esbuild will work around these run-time warnings by using newer APIs if they are present and falling back to the original APIs otherwise. This should avoid the warnings without breaking compatibility with older versions of Deno.
Unfortunately, doing this introduces a breaking change. The newer child process APIs lack a way to synchronously terminate esbuild's child process, so calling esbuild.stop() from within a Deno test is no longer sufficient to prevent Deno from failing a test that uses esbuild's API (Deno fails tests that create a child process without killing it before the test ends). To work around this, esbuild's stop() function has been changed to return a promise, and you now have to change esbuild.stop() to await esbuild.stop() in all of your Deno tests.
Reorder implicit file extensions within node_modules (#3341, #3608)
In version 0.18.0, esbuild changed the behavior of implicit file extensions within node_modules directories (i.e. in published packages) to prefer .js over .ts even when the --resolve-extensions= order prefers .ts over .js (which it does by default). However, doing that also accidentally made esbuild prefer .css over .ts, which caused problems for people that published packages containing both TypeScript and CSS in files with the same name.
With this release, esbuild will reorder TypeScript file extensions immediately after the last JavaScript file extensions in the implicit file extension order instead of putting them at the end of the order. Specifically the default implicit file extension order is .tsx,.ts,.jsx,.js,.css,.json which used to become .jsx,.js,.css,.json,.tsx,.ts in node_modules directories. With this release it will now become .jsx,.js,.tsx,.ts,.css,.json instead.
Why even rewrite the implicit file extension order at all? One reason is because the .js file is more likely to behave correctly than the .ts file. The behavior of the .ts file may depend on tsconfig.json and the tsconfig.json file may not even be published, or may use extends to refer to a base tsconfig.json file that wasn't published. People can get into this situation when they forget to add all .ts files to their .npmignore file before publishing to npm. Picking .js over .ts helps make it more likely that resulting bundle will behave correctly.
v0.19.12
The "preserve" JSX mode now preserves JSX text verbatim (#3605)
The JSX specification deliberately doesn't specify how JSX text is supposed to be interpreted and there is no canonical way to interpret JSX text. Two most popular interpretations are Babel and TypeScript. Yes they are different (esbuild deliberately follows TypeScript by the way).
Previously esbuild normalized text to the TypeScript interpretation when the "preserve" JSX mode is active. However, "preserve" should arguably reproduce the original JSX text verbatim so that whatever JSX transform runs after esbuild is free to interpret it however it wants. So with this release, esbuild will now pass JSX text through unmodified:
// Original code
let el =
<a href={'/'} title=''"'> some text
{foo}
more text </a>
// Old output (with --loader=jsx --jsx=preserve)
let el = <a href="/" title={'"}>
{" some text"}
{foo}
{"more text "}
</a>;
// New output (with --loader=jsx --jsx=preserve)
let el = <a href={"/"} title=''"'> some text
{foo}
more text </a>;
Allow JSX elements as JSX attribute values
JSX has an obscure feature where you can use JSX elements in attribute position without surrounding them with {...}. It looks like this:
This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.19.0 or ~0.19.0. See npm's documentation about semver for more information.
This time there is only one breaking change, and it only matters for people using Deno. Deno tests that use esbuild will now fail unless you make the change described below.
Work around API deprecations in Deno 1.40.x (#3609, #3611)
Deno 1.40.0 was just released and introduced run-time warnings about certain APIs that esbuild uses. With this release, esbuild will work around these run-time warnings by using newer APIs if they are present and falling back to the original APIs otherwise. This should avoid the warnings without breaking compatibility with older versions of Deno.
Unfortunately, doing this introduces a breaking change. The newer child process APIs lack a way to synchronously terminate esbuild's child process, so calling esbuild.stop() from within a Deno test is no longer sufficient to prevent Deno from failing a test that uses esbuild's API (Deno fails tests that create a child process without killing it before the test ends). To work around this, esbuild's stop() function has been changed to return a promise, and you now have to change esbuild.stop() to await esbuild.stop() in all of your Deno tests.
Reorder implicit file extensions within node_modules (#3341, #3608)
In version 0.18.0, esbuild changed the behavior of implicit file extensions within node_modules directories (i.e. in published packages) to prefer .js over .ts even when the --resolve-extensions= order prefers .ts over .js (which it does by default). However, doing that also accidentally made esbuild prefer .css over .ts, which caused problems for people that published packages containing both TypeScript and CSS in files with the same name.
With this release, esbuild will reorder TypeScript file extensions immediately after the last JavaScript file extensions in the implicit file extension order instead of putting them at the end of the order. Specifically the default implicit file extension order is .tsx,.ts,.jsx,.js,.css,.json which used to become .jsx,.js,.css,.json,.tsx,.ts in node_modules directories. With this release it will now become .jsx,.js,.tsx,.ts,.css,.json instead.
Why even rewrite the implicit file extension order at all? One reason is because the .js file is more likely to behave correctly than the .ts file. The behavior of the .ts file may depend on tsconfig.json and the tsconfig.json file may not even be published, or may use extends to refer to a base tsconfig.json file that wasn't published. People can get into this situation when they forget to add all .ts files to their .npmignore file before publishing to npm. Picking .js over .ts helps make it more likely that resulting bundle will behave correctly.
0.19.12
The "preserve" JSX mode now preserves JSX text verbatim (#3605)
The JSX specification deliberately doesn't specify how JSX text is supposed to be interpreted and there is no canonical way to interpret JSX text. Two most popular interpretations are Babel and TypeScript. Yes they are different (esbuild deliberately follows TypeScript by the way).
Previously esbuild normalized text to the TypeScript interpretation when the "preserve" JSX mode is active. However, "preserve" should arguably reproduce the original JSX text verbatim so that whatever JSX transform runs after esbuild is free to interpret it however it wants. So with this release, esbuild will now pass JSX text through unmodified:
// Original code
let el =
<a href={'/'} title=''"'> some text
{foo}
more text </a>
// Old output (with --loader=jsx --jsx=preserve)
let el = <a href="/" title={'"}>
{" some text"}
{foo}
{"more text "}
</a>;
// New output (with --loader=jsx --jsx=preserve)
let el = <a href={"/"} title=''"'> some text
{foo}
more text </a>;
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.
Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot show ignore conditions` will show all of the ignore conditions of the specified dependency
- `@dependabot ignore major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
- `@dependabot ignore minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
- `@dependabot ignore ` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore ` will remove all of the ignore conditions of the specified dependency
- `@dependabot unignore ` will remove the ignore condition of the specified dependency and ignore conditions
Bumps the all group with 4 updates: github.com/evanw/esbuild, github.com/google/uuid, github.com/sashabaranov/go-openai and github.com/klauspost/compress.
Updates
github.com/evanw/esbuild
from 0.19.11 to 0.20.0Release notes
Sourced from github.com/evanw/esbuild's releases.
... (truncated)
Changelog
Sourced from github.com/evanw/esbuild's changelog.
... (truncated)
Commits
2af5ccf
publish 0.20.0 to npm0bccf08
fix esbuild/deno-esbuild#5931f87d
work around api deprecations in deno 1.40.x (#3609) (#3611)22a9cf5
fix #3341, fix #3608: sort.ts
right after.js
f8ec300
runnpm pkg fix
as suggested by the npm clid7fd1ad
publish 0.19.12 to npme04a690
fix #3605: print the original JSX AST unmodifiedf571399
allow jsx elements as jsx attribute valuesa652e73
runmake update-compat-table
35c0d65
fix #3574: ts type parser bug with infer + extendsUpdates
github.com/google/uuid
from 1.5.0 to 1.6.0Release notes
Sourced from github.com/google/uuid's releases.
Changelog
Sourced from github.com/google/uuid's changelog.
Commits
0f11ee6
chore(master): release 1.6.0 (#151)16939da
chore(tests): add strict monotonicity test case for uuid v7. (#154)016b199
fix: fix typo in version 7 uuid documentation (#153)1d8b6ea
ci: set token permissions to github workflows (#143)a2b2b32
fix: Monotonicity in UUIDv7 (#150)c58770e
feat: add Max UUID constant (#149)Updates
github.com/sashabaranov/go-openai
from 1.18.3 to 1.19.2Release notes
Sourced from github.com/sashabaranov/go-openai's releases.
Commits
06ff541
Add new struct filed dimensions for embedding API (#645)4c41f24
Support January 25, 2024, models update. (#644)Updates
github.com/klauspost/compress
from 1.17.4 to 1.17.5Release notes
Sourced from github.com/klauspost/compress's releases.
Commits
6662a21
s2: Document and test how to peek the stream for skippable blocks (#918)3deb878
s2: Fix up AddSkippableBlock more (#919)6ac58c9
s2: Fix incorrect length encoded by writer.AddSkippableBlock (#917)515f153
s2: Fix callbacks for skippable blocks and disallow 0xfe (Padding) for custom...01b2a79
zstd: Limit default window to 8MB (#913)32312d5
flate: Fix reset with dictionary on custom window encodes (#912)d9b6e1e
zstd: Tweak noasm FSE decoder (#910)85452d2
zstd: Add Frame header encoding and stripping (#908)eabf71d
build(deps): bump the github-actions group with 1 update (#906)f6216d3
Update README.md (#905)Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase
.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show