search

Frix-x / klippain

Generic Klipper configuration for 3D printers
GNU General Public License v3.0
835 stars 219 forks source link

Add support to FYSETC Catalyst to Voron V0.2 #362

Closed pireybr closed 8 months ago

pireybr commented 9 months ago

Describe the feature or hardware support you'd like

Please add support to the new MCU from Fysetc https://github.com/FYSETC/Catalyst_Kit

Additional context or information

No response

Frix-x commented 9 months ago

Thanks for opening an issue, this will allow us to track it and include it in the next Klippain update

Surion79 commented 8 months ago

@pireybr I took a look at it. Can you verify my assumption, that this is a mainboard with a breakout board as toolhead board? I see only a mainboard with pins. the toolhead pins are just breakouts from the major connector on the mainboard.

pireybr commented 8 months ago

@pireybr I took a look at it. Can you verify my assumption, that this is a mainboard with a breakout board as toolhead board? I see only a mainboard with pins. the toolhead pins are just breakouts from the major connector on the mainboard.

Exactly Surion, and there an accelerometer in the toolhead board, but it uses the same pins in the main board