OpenVPN pass throw problem

GoogleCodeExporter commented 9 years ago

What steps will reproduce the problem?
1. pppoe to provider (router works fine)
2. Ubuntu 10.10
3. OpenVPN client (standard inside network manager)
4. try to connect to openvpn server and work.

What is the expected output? What do you see instead?
Expected - stable vpn channel, need to access network.
Instead connection crashes in 1-5 minutes, but vpn shows still connected, but 
even ping does not work. then vpn drops in about 15-20 minutes.
Works great with old wl520gu and WL520gu-1.9.2.7-d-r2624.trx or with DD-WRT.

What version of the product are you using?
RT-N16-1.9.2.7-rtn-r3121.trx
Asus RT-N16 router

Please provide any additional information below.

Original issue reported on code.google.com by tigr...@gmail.com on 5 Jul 2011 at 9:01

GoogleCodeExporter commented 9 years ago

Unfortunately, I can't reproduce the issue. Was previous builds (r2972, r2775, 
r2274) works? Are any errors in syslog?

Original comment by lly.dev on 6 Jul 2011 at 6:17

Changed title: OpenVPN pass throw problem

GoogleCodeExporter commented 9 years ago

not tested, just bought new rt-n16 and upgraded it's firmware to latest build. 
where can i download the ones mentioned?

Original comment by tigr...@gmail.com on 6 Jul 2011 at 12:07

GoogleCodeExporter commented 9 years ago

Search "Deprecated downloads" for "RT-N16"

Original comment by lly.dev on 6 Jul 2011 at 12:53

GoogleCodeExporter commented 9 years ago

Do NOT work with r2972, but works great with r2775 (r2274 not tested), so 
leaved with this one now. Will test whole day.
Nothing appears in syslog when vpn drops on older firmwares. VPN client also 
writes nothing to logs, looks like connection becomes idle or something like 
that..
More details: if just connect to openvpn and do nothing, ping become 
unresponsible in about 10-12 minutes. If try to open website: 30-60 seconds and 
vpn freezes. Vpn client shows disconnect only in 5-10 minutes after "freeze"

Original comment by tigr...@gmail.com on 7 Jul 2011 at 7:25

GoogleCodeExporter commented 9 years ago

First of all, try to turn off Fast-NAT, as written in 
http://code.google.com/p/wl500g/wiki/News

nvram set misc_fastnat_x=0
nvram commit

reboot

Original comment by lly.dev on 7 Jul 2011 at 9:45

GoogleCodeExporter commented 9 years ago

Thanks!
Everything looks working fine now!

Original comment by tigr...@gmail.com on 7 Jul 2011 at 12:57

GoogleCodeExporter commented 9 years ago

Unfortunately, Broadcom Fast-NAT not so smart, even with fixes & updates by 
theMIROn.

Original comment by lly.dev on 8 Jul 2011 at 6:18

Changed state: Done
Added labels: Type-Support
Removed labels: Type-Defect

GoogleCodeExporter commented 9 years ago

Issue 322 has been merged into this issue.

Original comment by lly.dev on 11 May 2012 at 7:29

GoogleCodeExporter commented 9 years ago

test r4320 with fastnat *enabled*

nvram unset misc_fastnat_x
nvram commit
reboot

should be no problem

Original comment by themiron.ru on 10 Jun 2012 at 10:46

Changed state: Fixed

GoogleCodeExporter commented 9 years ago

tested 4330 - still the same.
had to turn off fastnat again.

Original comment by tigr...@gmail.com on 17 Jun 2012 at 9:43

GoogleCodeExporter commented 9 years ago

I do not confirm. All conventional connections and DNAT work over tun openvpn 
interface now.
doublechecked misc_fastnat_x value, and it equals to 1.
Tested fw revisions: 4320, 4330.

Original comment by oblikoamorale@gmail.com on 18 Jun 2012 at 9:42

GoogleCodeExporter commented 9 years ago

conection to vpn sets up and works for a few seconds. than not able to laod 
anything. tested lot of times - same.

Original comment by tigr...@gmail.com on 19 Jul 2012 at 8:41

GoogleCodeExporter commented 9 years ago

probably your setup is broken. it's not related to FW.

Original comment by themiron.ru on 20 Jul 2012 at 6:30

FunkyLoiso / wl500g

OpenVPN pass throw problem #243