Vartkat
commented
3 years ago Quite the same here, Pin Status get stuck (either on Adding or Deleting) :
Looking at the ZWaveJS debug log, this seems to be synced with timeouts, even if after several retry it succeeds.
I'm surely missing something here, does Desired Pin State and Pin Status has to be Active and Connected to be sure the code has been memorized by the lock ?
A suggestion, perhaps "connected" is not the right word, wouldn't it be better to use "Acknowledged" (by the lock) or "received" ? Perhaps a extra step to verify if the code is really in the lock is necessary. I'm completly new to this kind of things so these are just suggestions (or I don't get the meaning of Pin Status and Desired Pin State).
Version | core-2021.11.2 Home Assistant Supervised Supervisor | true Docker | true Utilisateur | root virtual | false Python | 3.9.7 Linux 5.10.0-9-arm64 aarch64
And the lock is a BE469ZP from Schlage with Z-Wave chip firmware versions ["3.3","11.0"]
Vart
kaechele
nicocoetzee
?
short4bmoney
firstof9
darrylb83
.
.
Describe the bug I installed this via HACS and cannot get it to work properly. The PIN Status stays on "Adding" & Lock and lock, but sees error "Entity not found" and this means non of the user pins are getting registered. I can lock and unlock the lock from Lovelace.
Logs General Server Controls Logs Info Failed connecting to recently alive device at http://192.168.1.4:8091/XD/BO5EBO5E-F00D-F00D-FEED-08DF1F07DE60.xml: UpnpError('Could not find service state table element') 6:48:59 PM – (WARNING) DLNA Digital Media Renderer - message first occurred at 6:19:57 PM and shows up 57 times boltchecked_yeal_deadbolt: Already running 6:42:09 PM – (WARNING) helpers/script.py - message first occurred at 6:42:04 PM and shows up 3 times Unable to find referenced entities timer.keymaster_yeal_deadbolt_autolock 6:27:43 PM – (WARNING) helpers/service.py Template warning: 'int' got invalid input 'unkno' when rendering template '{## This template checks whether the PIN should be considered active based on ##} {## all of the different ways the PIN can be conditionally enabled/disabled ##} {## Get current date and time ##} {% set now = now() %} {## Get current day of week, date (integer yyyymmdd), and time (integer hhmm) ##} {% set current_day = now.strftime('%a')[0:3] | lower %} {% set current_date = now.strftime('%Y%m%d') | int %} {% set current_time = now.strftime('%H%M') | int %} {% set current_timestamp = as_timestamp(now) | int %} {## Get whether date range toggle is enabled as well as start and end date (integer yyyymmdd) ##} {## Determine whether current date is within date range using integer (yyyymmdd) comparison ##} {% set is_date_range_enabled = is_state('input_boolean.daterange_yeal_deadbolt_4', 'on') %} {% set start_date = state_attr('input_datetime.start_date_yeal_deadbolt_4', 'timestamp') | int %} {% set end_date = state_attr('input_datetime.end_date_yeal_deadbolt_4', 'timestamp') | int %} {## Only active if within the full datetime range. To get a single day both start and stop times must be set ##} {% set is_in_date_range = (start_date < end_date and current_timestamp >= start_date and current_timestamp <= end_date) %} {## Get current days start and end time (integer hhmm). Assume time range is considered enabled if start time != end time. ##} {## If time range is inclusive, check if current time is between start and end times. If exclusive, check if current time is before start time or after end time. ##} {% set current_day_start_time = (states('input_datetime.' + current_day + '_start_date_yeal_deadbolt_4')[0:5]).replace(':', '') | int %} {% set current_day_end_time = (states('input_datetime.' + current_day + '_end_date_yeal_deadbolt_4')[0:5]).replace(':', '') | int %} {% set is_time_range_enabled = (current_day_start_time != current_day_end_time) %} {% set is_time_range_inclusive = is_state('input_boolean.' + current_day + '_inc_yeal_deadbolt_4', 'on') %} {% set is_in_time_range = ( (is_time_range_inclusive and (current_time >= current_day_start_time and current_time <= current_day_end_time)) or (not is_time_range_inclusive and (current_time < current_day_start_time or current_time > current_day_end_time)) ) %} {## Get whether code slot is active and current day is enabled ##} {% set is_slot_enabled = is_state('input_boolean.enabled_yeal_deadbolt_4', 'on') %} {% set is_current_day_enabled = is_state('input_boolean.' + current_day + '_yeal_deadbolt_4', 'on') %} {## Check if access limit is enabled and if there are access counts left. ##} {% set is_access_limit_enabled = is_state('input_boolean.accesslimit_yeal_deadbolt_4', 'on') %} {% set is_access_count_valid = states('input_number.accesscount_yeal_deadbolt_4') | int > 0 %} {## Code slot is active if slot is enabled + current day is enabled + date range is not enabled or current date is within date range ##} {## + time range is not enabled or current time is within time range (based on include/exclude) + access limit is not enabled or there are more access counts left ##} {{ is_slot_enabled and is_current_day_enabled and (not is_date_range_enabled or is_in_date_range) and (not is_time_range_enabled or is_in_time_range) and (not is_access_limit_enabled or is_access_count_valid) }}' but no default was specified. Currently 'int' will return '0', however this template will fail to render in Home Assistant core 2022.1 6:27:13 PM – (WARNING) helpers/template.py - message first occurred at 6:27:13 PM and shows up 105 times Cannot add automation.keymaster_front_door_lock_unlocked_start_autolock as this would exceed the 150 device limit. Consider using the filter option 6:20:00 PM – (WARNING) HomeKit - message first occurred at 6:20:00 PM and shows up 190 times Discovery for value Value(value_id='14-49-0-UNKNOWN (0x00)') on device 'Motion - Office' (Node(node_id=14)) will be skipped: Value Value(value_id='14-49-0-UNKNOWN (0x00)') has unknown data in the following location: metadata.cc_specific.sensorType. A reinterview of node Node(node_id=14) may correct this issue, but if it doesn't, please report this issue as it may be caused by either an upstream issue with the driver or missing support for this data in the library 6:19:56 PM – (ERROR) Z-Wave JS
Much appreciated.