I was about to order parts for a TOTEM Build when I noticed that beekeeb seems to sells a Version of the Totem that has JST Connector for Battery above the Diodes array [1] . They also altered the outside dimension of the Case to fit a Battery in there (above the array).
Since I am a Fan of not soldering batteries and also struggle to find a local source (for insurance reasons) for a tiny 22x15x7.5 Lipo (751517 walkera 100mah was mentioned) I wanted to make this Feature request to be considered in possible future iterations of the totem.
I guess a LP-401230 could be fitted above the Diodes Array if the Space there is just slightly increased. Currently it should have approx 7 x 11.5 x 48 mm.
From the Meshfiles I measured with of 11.5 mm, so just 0.5 (+.25 tolerance maybe) seem to be missing.
Maybe even the outside dimensions could be maintained.
Hi,
I was about to order parts for a TOTEM Build when I noticed that beekeeb seems to sells a Version of the Totem that has JST Connector for Battery above the Diodes array [1] . They also altered the outside dimension of the Case to fit a Battery in there (above the array). Since I am a Fan of not soldering batteries and also struggle to find a local source (for insurance reasons) for a tiny 22x15x7.5 Lipo (751517 walkera 100mah was mentioned) I wanted to make this Feature request to be considered in possible future iterations of the totem.
I guess a LP-401230 could be fitted above the Diodes Array if the Space there is just slightly increased. Currently it should have approx 7 x 11.5 x 48 mm. From the Meshfiles I measured with of 11.5 mm, so just 0.5 (+.25 tolerance maybe) seem to be missing. Maybe even the outside dimensions could be maintained.
[1] https://shop.beekeeb.com/product/pre-soldered-wireless-totem/