PrAss ignores additional current when installing TecTech energy storage and no longer overclocking or paralleling

[JodieRuth]

Your GTNH Discord Username

JodieRuth

Your Pack Version

2.4.0RC1

Your Server

SP

Java Version

Java 8

Type of Server

Single Player

Your Expectation

PrAss should correctly identify the total power brought by TecTech energy storage and arrange for parallel and overclocking

The Reality

PrAss only executes its corresponding formula and basic possible overclocking according to the TecTech energy warehouse level when installing the TecTech energy warehouse, ignoring the additional current brought by the TecTech energy warehouse. For example, a UEV 4096A energy storage chamber produces UEV superconductors without any overclocking, only with basic 100% acceleration. If UHV superconductivity is produced, then due to the power of UEV being four times that of UHV, it is normal to overclock once, and then ignore the excess current and no longer overclock.

This is the production of UHV superconductor (UHV, 128 seconds), and it can be seen that the correct use of 100% acceleration and one overclocking arrived at UEV32 seconds, still ignoring the additional current.

Your Proposal

Fix it

Final Checklist

• [X] I have searched this issue tracker and there is nothing similar already. Posting on a closed issue saying the bug still exists will prompt us to investigate and reopen it once we confirm your report.
• [X] I can reproduce this problem consistently by follow the exact steps I described above, or this does not need reproducing, e.g. recipe loophole.
• [X] I have asked other people and they confirm they also have this problem by follow the exact steps I described above, or this does not need reproducing, e.g. recipe loophole.

[miaowwwwww]

can confirm, this is important, should be fixed before stable

[chochem]

so it doesnt do parallel?

[chochem]

together with your other ticket that sounds like the modes are swapped regarding parallels?

[JodieRuth]

After more testing, it seems that this issue is only concentrated during overclocking.

[BlueWeabo]

The PrAss won't use amperage to overclock additionally. It will only use amperage for parallel. Overclocking is done only with the voltage of the hatch. Do I understand correctly you want it to overclock with amperage? The language barrier is quite bit and I can't fully understand what the problem is.

[JodieRuth]

Ah yes, it only overclocking based on energy hatch level and formula level, completely ignoring the additional power brought by TecTech

[miaowwwwww]

so before: UMV laser, do umv sc recipe, which is 80s umv. we can parallel and overclock if given enough energy. now: it does 80s per run with only 1 parallel regardless.

[BlueWeabo]

When was the before.

[JodieRuth]

Every version of PrAss that runs normally before non 2.4.0RC1

[miaowwwwww]

in zeta, i had no issue like this yesterday. so just rc1 update, or sometime really close.

[chochem]

Every version of PrAss that runs normally before non 2.4.0RC1

well thats not correct. it was broken way worse in 2.3.7. but I understand now I think.

in 2.3.0 for example it was restricting recipes based on energy hatch tier but still OCing them beyong energy hatch tier if they were allowed. is that correct?

[miaowwwwww]

yes

[JodieRuth]

First, use the 100% acceleration of the machine itself, and then overclock based on the additional power brought by TecTech energy hatch

[chochem]

First, use the 100% acceleration of the machine itself, and then overclock based on the additional power brought by TecTech energy hatch

no thats false. that was the broken stuff in 2.3.7

[JodieRuth]

首先利用机器本身的100%加速，然后基于TecTech能量孵化带来的额外动力进行超频

不，那是假的。那是2.3.7中损坏的东西

Under normal circumstances. Overfrequency ignoring the energy hatch level in 2.3.7 is a bug

[miaowwwwww]

wp