search

GadgetAngel / Voron2.4_My_Build_Log

This repository will hold any documents I use to help with building my Voron 2.4 250mm 3D Printer and the Voron 2.4 LDO 300mm Printer
GNU General Public License v2.0
85 stars 14 forks source link

Voron 2.4r2 side skirts #2

Open ghost opened 2 years ago

ghost commented 2 years ago

HI I AM WONDERING IS YOU HAVE THE SIDE PANEL FOR THE KEWEISI METER FOR THE VORON 2.4R2 SIDE SKIRTS AS THERE ARE NOT THE SAME AS THE r2

GadgetAngel commented 2 years ago

HI I AM WONDERING IS YOU HAVE THE SIDE PANEL FOR THE KEWEISI METER FOR THE VORON 2.4R2 SIDE SKIRTS AS THERE ARE NOT THE SAME AS THE r2

I intend to update those panels and my whole model to the Voron2.4r2 when I have the time. It will be about a month before I can get to it. I need to build my LDO Voron 2.4 kit first and set that printer up so I can start printing the models for my QUEEN build. Once I have my LDO Voron 2.4 up and running I will update the model for QUEEN and that is when all the fusion360 modeling will be redone to get the skirts adjusted.

Presently, I have to delay the build for my LDO kit because I am working on the Voron DOC sites documentation. I have 17 pull requests in right now and I have another 14 yet to do.

Please, be patient with me. Like I said in my Voron Build LOG this is a work in progress.

GadgetAngel commented 2 years ago

HI I AM WONDERING IS YOU HAVE THE SIDE PANEL FOR THE KEWEISI METER FOR THE VORON 2.4R2 SIDE SKIRTS AS THERE ARE NOT THE SAME AS THE r2

Here is my attempt at it: model in fusion360: GA_PowerSkirt_V2.4r2 v19.zip

STL file: PowerSkirt_V2r2.zip

accent piece for around the face: a_PowerSkirt_V2r2_piece.zip

Here is a picture: PowerSkirt_V2r2

The accent piece is optional, it is there to add color to that side of the printer. It does not play a functional part.