search

GadgetReboot / ESP32-A1S

Breakout PCB for the ESP32-A1S module including an audio amp and basic GPIO headers, USB interface
15 stars 6 forks source link

USB socket #3

Closed bench2012 closed 2 years ago

bench2012 commented 2 years ago

Hi,

First of thanks for a very interesting board. I was going the same way, when I came across your project on GitHub. I managed to make a few board, but since there is no BOM list, just wonder which and where you got the usb socket? Usb socket could be a real pain to get right.

Many thx.

Bench

GadgetReboot commented 2 years ago

The USB Micro-B connector on the board is GCT p/n USB3076-30-A available from Digikey, Mouser etc

bench2012 commented 2 years ago

The USB Micro-B connector on the board is GCT p/n USB3076-30-A available from Digikey, Mouser etc

Many thx. Will let you know how I get with this project. Again thanks for designing the board.