Open Mutexistante opened 4 years ago
I've got the exact same problem on REKS Lenovo N42 after Gallium OS 3 fresh install. Sound was working great with previous version. Thanks for looking at this.
I have the same issue on an Asus C223. Not sure where to go from here
I don't have machines like yours, so I probably can't help.
However,
lspci
output is pretty useless without the -k
(or -kv
), and dmesg
output is even better.
@penguintiz start here.
A few days ago i installed GalliumOS 3.0 on a lenovo n42, after that i have no sound from speakers. As default sink appears "Dummy output". I'm new at gallium, no idea what's happening.
lspci 00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 35) 00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 35) 00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 35) 00:10.0 SD Host controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series MMC Controller (rev 35) 00:12.0 SD Host controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SD Controller (rev 35) 00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 35) 00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 35) 00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 35) 00:1c.2 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 (rev 35) 00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 35) 02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 61)
firmware: MrChromebox-4.10 (UEFI)
installation method: ISO