Tricopter channel 7 (yaw) output is not graphed in tuning

GoogleCodeExporter commented 8 years ago

Arducoper NG or ACM?
What steps will reproduce the problem?
1. Inmission planner, check the Tuning checkbox.
2. Select channel 7 output, and channel 4 input
3. increase throttle above 0, and move the yaw stick.

What is the expected output? What do you see instead?
I expect to see channel 7 output values that follow with channel 4 input values.

What version of the product are you using? On what operating system?
2.2b6 MP1.1.30

Original issue reported on code.google.com by w1ng...@yahoo.com on 1 Feb 2012 at 1:26

Attachments:

[no yaw servo out.jpg](https://storage.googleapis.com/google-code-attachments/arducopter/issue-322/comment-0/no yaw servo out.jpg)

GoogleCodeExporter commented 8 years ago

(yes, the servo is moving when I move the yaw stick)

Original comment by w1ng...@yahoo.com on 1 Feb 2012 at 1:28

GoogleCodeExporter commented 8 years ago

This has been fixed in 2.3 (the latest version downloadable from the mission 
planner)

Original comment by rmackay...@gmail.com on 1 Feb 2012 at 12:26

Changed state: Fixed

GoogleCodeExporter commented 8 years ago

This is not fixed in 2.3, or was unfixed with the reversion of the motor remaps.

Original comment by w1ng...@yahoo.com on 2 Feb 2012 at 3:53

Gathiyo / arducopter

Tricopter channel 7 (yaw) output is not graphed in tuning #322