Adding Options Contracts Blocks The Loop Of Stocks

[dvsrk]

For example added this contract PYPL250117C00062500 and the loop of stocks stopped working after the last stock it hits.

And, it is not the case always though, it works sometimes but not always, it is little flappy. Please check.

btw, I'm using 1d k-line interval.

[GeekMagicClock]

Hi, I have tested it on my device, but not happen, can you try the latest V3.2.25?

[dvsrk]

I have updated to latest V3.2.25 but no luck, And tried on my all 3 devices and it is same.

Reproducible Steps:

1. Reset the device
2. Add following stocks to stocks section,
   • In my case added following. DIS NVDA
3. Enable the loop.
4. Switch back to apps navigation on device and select Stock app.
5. At this stage everything should work as expected.
6. Now add PYPL250117C00080000 as third stock.
7. Reboot the device.
8. Now you will see the loop will stop at NVDA, without moving to 3rd one .

[GeekMagicClock]

I have updated to latest V3.2.25 but no luck, And tried on my all 3 devices and it is same.

Reproducible Steps:

1. Reset the device

2. Add following stocks to stocks section,

   • In my case added following. DIS NVDA
3. Enable the loop.
4. Switch back to apps navigation on device and select Stock app.
5. At this stage everything should work as expected.
6. Now add PYPL250117C00080000 as third stock.
7. Reboot the device.
8. Now you will see the loop will stop at NVDA, without moving to 3rd one .

Got it, I'm able to reproduce it, I'll check it out, thank you for the details.

[GeekMagicClock]

Hi, it is issue about saving long stock symbol, fixed in the attachement V3.2.25.1, please try, thank you. firmware.zip

[dvsrk]

It is resolved under attached firmware. Hope this fix will be bundled with your future release. And just a suggestion or feature request, great if you could make the chart animation introduced in V3.2.25 as an option, so we could enable it only if we need it.