search

GideonZ / ultimate_releases

Binary blobs of U2/U2+ and U64 firmware versions
71 stars 5 forks source link

Issue with built-in Action Replay Carts. #4

Open propilot74 opened 4 years ago

propilot74 commented 4 years ago

With the new firmware V1.28 - 3.7 there is an issue with the built-in Action Replay cartridges. With AR 6.0 if I press F7 to install Fastload, it takes me to the Action Replay Menu, and pressing F3 does not take me back to the BASIC command prompt. With AR4.2, pressing F7 shows the fastloader installed, but the system freezes and there is no blinking cursor.

RichardTND commented 4 years ago

I seem to be having no trouble with the plugins on my Ultimate 64 with V1.28 - 3.7 on my U64.

Are you using a 1541Ultimate 2 or Ultimate 64 with the firmware upgrade? Is REU enabled? If so, try disabling it. That might work. I remember having that kind of trouble before, and disabling the REU did the trick.

propilot74 commented 4 years ago

I'm using the Ultimate 64 with the most recent firmware upgrade. I'll check to see if REU is enabled and see if that is my problem.....

On Thu, Apr 30, 2020, 9:15 AM RichardTND notifications@github.com wrote:

I seem to be having no trouble with the plugins on my Ultimate 64 with V1.28 - 3.7 on my U64.

Are you using a 1541Ultimate 2 or Ultimate 64 with the firmware upgrade? Is REU enabled? If so, try disabling it. That might work. I remember having that kind of trouble before, and disabling the REU did the trick.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/GideonZ/ultimate_releases/issues/4#issuecomment-621954529, or unsubscribe https://github.com/notifications/unsubscribe-auth/APDRMAOOTZVVT6NHSXMBNETRPGP3NANCNFSM4MEKVP6Q .

propilot74 commented 4 years ago

I disabled the REU and rebooted. I'm still having the same issue with the action replay carts. No luck there.

On Thu, Apr 30, 2020, 9:15 AM RichardTND notifications@github.com wrote:

I seem to be having no trouble with the plugins on my Ultimate 64 with V1.28 - 3.7 on my U64.

Are you using a 1541Ultimate 2 or Ultimate 64 with the firmware upgrade? Is REU enabled? If so, try disabling it. That might work. I remember having that kind of trouble before, and disabling the REU did the trick.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/GideonZ/ultimate_releases/issues/4#issuecomment-621954529, or unsubscribe https://github.com/notifications/unsubscribe-auth/APDRMAOOTZVVT6NHSXMBNETRPGP3NANCNFSM4MEKVP6Q .

RichardTND commented 4 years ago

Try downgrading the firmware to the last version you had working on Action Replay. If it works then there is a bug in V1.28 - 3.7 otherwise try doing a factory reset. WARNING: This will restore the Ultimate 64's settings to its original state, but the firmware will still be in tact. This means that you will need to edit the U64's settings in the menu, i.e. sound, video, devices, etc.

propilot74 commented 4 years ago

Well, a factory reset fixed it. Don't know what the actual problem was. It was something to do with my config. All working again for now. Thanks for the help.

On Sat, May 2, 2020, 3:59 AM RichardTND notifications@github.com wrote:

Try downgrading the firmware to the last version you had working on Action Replay. If it works then there is a bug in V1.28 - 3.7 otherwise try doing a factory reset. WARNING: This will restore the Ultimate 64's settings to its original state, but the firmware will still be in tact. This means that you will need to edit the U64's settings in the menu, i.e. sound, video, devices, etc.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/GideonZ/ultimate_releases/issues/4#issuecomment-622935357, or unsubscribe https://github.com/notifications/unsubscribe-auth/APDRMAPSBYTOOO53MC4XGO3RPP4IVANCNFSM4MEKVP6Q .

RichardTND commented 4 years ago

I'm glad that fixed the problem. Could be something to do with cartridge options perhaps? There are three options for cartridge. Internal / External / Auto. External is for physical cartridges. This means it is possible to use a physical cartridge. Internal allows you to use a built in cartridge. Factory Reset resets to default settings, as what you would get on first having the Ultimate 64. The only thing that does not change is the firmware version.