Open Wladimir25 opened 2 years ago
Hi Wlad
Please check here if you can open the HMI file with the nextion editor
https://github.com/GillesLACAUD/OPLA-OTHER-FILES/tree/main/05%20Design
Musicaly Gilles/Hansy Synth
----- Mail original -----
De: "Wladimir25" @.> À: "GillesLACAUD/OPLA-Source-code" @.> Cc: "Subscribed" @.***> Envoyé: Vendredi 4 Mars 2022 16:48:59 Objet: [GillesLACAUD/OPLA-Source-code] File "ESP32_V2.tft" (Issue #55)
Hi Gilles, the file "ESP32_V2.tft" in "SD Card.zip" is probably invalid. Please doublecheck the file. I also tried to open it with Nextion Editor Simulator. Greetings to France Andreas — Reply to this email directly, view it on GitHub , or unsubscribe . Triage notifications on the go with GitHub Mobile for iOS or Android . You are receiving this because you are subscribed to this thread. Message ID: <GillesLACAUD/OPLA-Source-code/issues/55 @ github . com>
Hi Gilles, yes, I'm able to open these files with the Nextion Editor and convert them from .hmi to .tft file. Uploading the *.tft file to the Nextion Display is possible, too. Is the file "ESP32_V2.tft" in "SD Card.zip" a new one or is it the same? It has the same size but not the same content. Cheers Andreas
Update done Please check the up to date version and the readme
Sorry, both hmi-files are not readable with the nextion editor (1.63.3). I've got an error message. The new files are very small, only 200k, the old one was 2M. Cheers Andreas
I Wlad. I have test with a donwload (1.3M) and all is ok for me (Nextion editor 1.63.3). And the size of the file for the old Nextion is 1.9M and the for the new one 1.3M. Please try again
Gilles, thank you for your patience, it was my problem with the (defect) download got the O.P.L.A working Thank you for building it
Did you build your own OPLA ?...please send me a photo.... :-)
Yes, you made it easy to rebuild
.
Great !!!! I really love it....and you have add a MIDI out and Thru...good point. With some board i have some noise when the power supply supervisor is on (The green led i think). To cancle this noise i just pull the pin1 so the supervisor is not powered. Could you explain then resistor on the board ? do you use the push button. I hope you can change the code also for some other features... Can i share your picture ?
I have'nt heard about noise problem until now, I keep it in mind. Thanks for the tip.
I changed the power supply for the nextion to 5V (pin VCC5V in the schematic).
The idea for using the resistors I took over from Marcel Licence, I used the board also for a synth-project from Marcel.
You can use the keys with only one portpin.
I actually have no plans for writing software, sorry.
Share the picture if you like.
Cheers Andreas
Hi Gilles, the file "ESP32_V2.tft" in "SD Card.zip" is probably invalid. Please doublecheck the file. I also tried to open it with Nextion Editor Simulator. Greetings to France Andreas