search

GioPalusa / adventurer3Cura

Cura settings for Adventurer 3
23 stars 15 forks source link

Cura Error: Unable to Slice #1

Open BMOtheConsole opened 4 years ago

BMOtheConsole commented 4 years ago

Importing your Settings did go like described, but in Cura i cant Slice the Model.

The Error Message says "Unable to Slice" With no extra Information Why.

GioPalusa commented 4 years ago

Yeah. I’m trying to figure out why this is happening... I haven’t had time to look into it, but I will have more time the upcoming days to solve that issue...

totisso commented 4 years ago

Sorry buddy for the inconvenience but it's true. Unfortunately your settings doesn't work. Many people are waiting for your help.. We are on Cura 4.7.0..

ajzbern commented 3 years ago

profile is still unable to slice, whats going on with the fix? any progress or attempts

Slade2000 commented 3 years ago

Yup same issue still. Can't Slice.

KeltE commented 3 years ago

Hello! Can anyone test my branch from the Adventure 3 Definition. I don't have Adventure 3 but I made some changes based on the definition of a working Dreamer NX. Cura 4.8 at least slices now. Egon https://github.com/KeltE/adventurer3Cura

camyrland commented 3 years ago

Hello! Can anyone test my branch from the Adventure 3 Definition. I don't have Adventure 3 but I made some changes based on the definition of a working Dreamer NX. Cura 4.8 at least slices now. Egon https://github.com/KeltE/adventurer3Cura

I tried it. Crashed my Cura, had to roll back and lost my current printer setup. 4.8.0

KeltE commented 3 years ago

Strange. I also tested Cura 4.8. I slice without any problems. I just checked again too, it works. image

KeltE commented 3 years ago

He has not even noticed that the location in the teaching is completely wrong. Must copy on windows C: \ Program Files \ Ultimaker Cura 4.8.0 Did not view the read.me file at all. Sorry for the inconvenience.

camyrland commented 3 years ago

Strange. I also tested Cura 4.8. I slice without any problems. I just checked again too, it works. image

I'm using Cura as a snap on Ubuntu, but that shouldn't matter..

camyrland commented 3 years ago

He has not even noticed that the location in the teaching is completely wrong. Must copy on windows C: \ Program Files \ Ultimaker Cura 4.8.0 Did not view the read.me file at all. Sorry for the inconvenience.

I tried again after setting up Cura again, and now it seems to work. Slices just nicely. I have the Adventurer 3 at work, so I won't get around to testing it until late next week.

KeltE commented 3 years ago

II discovered the profile from which branch I made is the tutorials completely wrong. And the original profile is almost a copy of Euger Creator pro's profile. Which is a completely different printer. Creator pro Sailfish commands are different. The location on Windows must be "C: \ Program Files \ Ultimaker Cura 4.8.0 \ resources" Not as specified in the original profile. I'm fixing my read.me file. The printer appears under Flashforge3. Since I have a Flashforge manufacturer named Cura 4.9 comes with the included Dreamer NX printer. And otherwise, the separately copied printer does not appear in the list.

camyrland commented 3 years ago

He has not even noticed that the location in the teaching is completely wrong. Must copy on windows C: \ Program Files \ Ultimaker Cura 4.8.0 Did not view the read.me file at all. Sorry for the inconvenience.

For anyone interested, I've started a new thread over at KeltE's project: https://github.com/KeltE/adventurer3Cura/discussions/2

totisso commented 3 years ago

Does anybody knows where can I find the correct path on IOS? I’m trying to find out without success..

Thanks a lot..!!

On 3 Apr 2021, at 20:57, camyrland @.***> wrote:

He has not even noticed that the location in the teaching is completely wrong. Must copy on windows C: \ Program Files \ Ultimaker Cura 4.8.0 Did not view the read.me file at all. Sorry for the inconvenience.

For anyone interested, I've started a new thread over at KeltE's project: KeltE#2 https://github.com/KeltE/adventurer3Cura/discussions/2 — You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/GioPalusa/adventurer3Cura/issues/1#issuecomment-812917942, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQW5WQGVXAKNRSPQWFTMBL3TG5XMJANCNFSM4KXKLZOA.

totisso commented 3 years ago 
Correction:     is not IOS.. I meant macOS.. Sorry guys..

On 5 Apr 2021, at 17:18, Sergio Silva @.***> wrote:

Does anybody knows where can I find the correct path on IOS? I’m trying to find out without success..

Thanks a lot..!!

On 3 Apr 2021, at 20:57, camyrland @. @.>> wrote:

He has not even noticed that the location in the teaching is completely wrong. Must copy on windows C: \ Program Files \ Ultimaker Cura 4.8.0 Did not view the read.me http://read.me/ file at all. Sorry for the inconvenience.

For anyone interested, I've started a new thread over at KeltE's project: KeltE#2 https://github.com/KeltE/adventurer3Cura/discussions/2 — You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/GioPalusa/adventurer3Cura/issues/1#issuecomment-812917942, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQW5WQGVXAKNRSPQWFTMBL3TG5XMJANCNFSM4KXKLZOA.

KeltE commented 3 years ago

Maybe helps. Found this tutorial. https://help.prusa3d.com/ja/guide/how-to-import-profiles-to-cura-4-x-windows-macos_17848

TheOneTrueRazor commented 3 years ago

Correction: is not IOS.. I meant macOS.. Sorry guys.. …

Did you ever find the correct location?