Batman Arkham City not detecting X360ce?

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Place x360ce inside C:\Program Files (x86)\Rocksteady\Batman Arkham 
City\Binaries\Win32
2. Start it up, load the profile, fix your keys etc.
3. Start the game

What is the expected output? 
The controls to work. Maybe hear a beep to confirm x360ce is working.

What do you see instead?
Reverse movement and camera controls (left and right stick). No beep.
Game seems to ignore x360 and just detect the gamepad itself with the left and 
right sticks inverted. I tried this with and without x360 and still the same 
results. It seems the game isnt detecting x360 at all.

What version of x360ce and Windows are you using?
Latest x360ce version and Windows 7 64bit

What gamepad are you using? On what version of drivers?
Twin USB Joystick
I dont know if it matters but it has two controllers attached to each other 
with one USB cable (not modded or just comes with two controllers attached to 
one cable). It worked for assasins creed revelations / brotherhood and skyrim 
(only games ive tried it on). No drivers from what i know considering it only 
says USB Control on the actual controllers with no sign of the maker. Its 
always detected as Generic USB Controller or Twin USB Joystick.

Please attach a log file created with Log=1 setting in x360ce.ini file,
and screenshot of x360ce app tab with you gamepad capabilities.

Issue report without Log will be marked as Invalid !

Original issue reported on code.google.com by lewisnje...@yahoo.com on 6 Dec 2011 at 7:03

Attachments:

• x360ce_20111206-105807.log
• Untitled-1.jpg

[GoogleCodeExporter]

I got this working, after a lot of messing around it's just 1 simple setting.  
Make sure you have xinput9_1_0.dll selected under 'installed files' section of 
the Options tab.

Original comment by damit...@gmail.com on 16 Dec 2011 at 8:32

Attachments:

• bmac-fix.jpg

[GoogleCodeExporter]

this did not work for me, all the other problems you detailed are still there 
(inverted controls, start/select mixed up) are you sure it wasn't another 
setting you changed?

Original comment by tew...@gmail.com on 25 Dec 2011 at 2:47

[GoogleCodeExporter]

worked fine for me, all i did was put it in there, let it configure itself 
enabled that check box and it worked fine.

Original comment by lewisnje...@yahoo.com on 25 Dec 2011 at 1:33

[GoogleCodeExporter]

The fix did not work for me.

Original comment by mmiz...@gmail.com on 3 Jan 2012 at 12:48

[GoogleCodeExporter]

I have the same problem!! addind the 9_1_0.dll doesn´t help! I run the game on 
xp sp3 with an alienware dual compatible game pad, I just don´t know what else 
to try

Original comment by zealhe.q...@gmail.com on 5 Jan 2012 at 6:43

[GoogleCodeExporter]

I've also placed dinput8.dll in game's exe directory and my analog stick 
started to work correctly, I'm not sure if this would help on its own, anyway I 
got this file from tocaedit.com/dl/dinput8-x360cev21.zip (the one in 'spoofer' 
folder)

Original comment by krzymos...@gmail.com on 6 Aug 2012 at 4:16

[GoogleCodeExporter]

I have tried all the above with no success.  It used to work now it's all 
inverted even with new emulator.  

Original comment by jonat...@jjtechcomputer.com on 19 Nov 2012 at 12:33

[GoogleCodeExporter]

My x360ce config used to work on this game, but after complete sytem reinstall, 
my config backup doesn't work anymore

here is my x360ce package for experiment
http://dl.dropbox.com/u/39293134/x360ce.rar

Original comment by suyal...@gmail.com on 20 Nov 2012 at 3:07

[GoogleCodeExporter]

This is normal because Instance GUID was changed. You need to modify ini 
manually or recreate it using config app.

Original comment by tapcio on 20 Nov 2012 at 3:12

[GoogleCodeExporter]

I downloaded the new version but the both analog movement is not detected

Original comment by suyal...@gmail.com on 20 Nov 2012 at 3:13

[GoogleCodeExporter]

ignore my previous comment, already got it
I'll try making a new config

Original comment by suyal...@gmail.com on 20 Nov 2012 at 3:15

[GoogleCodeExporter]

I got it
make sure you put all the files in [INSTALL_PATH]\Warner Bros\Rocksteady 
Studios\Batman Arkham City\Binaries\Win32

if you put it on Warner Bros\Rocksteady Studios\Batman Arkham City
the game won't detect x360ce ( no beeping sound )

Original comment by suyal...@gmail.com on 20 Nov 2012 at 3:28

[GoogleCodeExporter]

Do anyone interested: I got this working with Saitek P3200. Here are the key 
points:

-Suyal's comment was correct, you need to put it in the right directory before 
anything would work
-If your analog sticks are inverted, you just have to invert it when recording. 
I.E. When recording make sure the number is positive when tilted to the right 
(for axis axis), or up (for y axis)
-Lastly, you must configure a proper dead zone if you have analog triggers (R2, 
L2). For my controller, I had to go to controller 1 > advanced >, and set 56% 
dead zone for both triggers.

Original comment by LukeSY...@gmail.com on 27 Nov 2012 at 1:50

[GoogleCodeExporter]

I hear the beep when the game starts, all the settings respond properly in 
emulation but everything is reversed in the game except for left and right.  2 
and 3, 1 and 4 and all triggers are reversed.  Doesn't matter if I change all 
the button configuration in the emulator, all buttons and analog stick are 
reversed - like its not detecting the xbox emulator at all.  All files are 
loaded in binaries/win32.  It used to work with the old emulator, then it 
stopped working so I removed old emulator and went to the new one.  I've tried 
every dll and still no change.

Original comment by jonat...@jjtechcomputer.com on 28 Nov 2012 at 1:12

[GoogleCodeExporter]

^jonat... : here, use my setting, i hope it work for you. 
http://dl.dropbox.com/u/39293134/x360ce-ini.zip

Original comment by suyal...@gmail.com on 30 Nov 2012 at 10:14

[GoogleCodeExporter]

So frustrated!!  Removed all emulator files, re-installed latest version (163) 
of x360ce.  Replaced x360ce with suyal config file.  Loaded game, beeped to 
recognize emulator and all controls are exactly the same!  It doesn't matter if 
I change all the setting around in the config files the controls remain exactly 
the same!  I am using logitech rumblepad 2 and I think a steam update to this 
game rendered the gamepad absolutely useless but I refuse to buy an xbox pc 
controller! 

Original comment by jonat...@jjtechcomputer.com on 8 Dec 2012 at 11:11

[GoogleCodeExporter]

^jonat... : i wasn't aware that you use logitech rumblepad, my config is for 
twin USB joystick ( PS2 controller with USB converter ). I am pretty sure 
logitech has it's own website for game keymapping config

Original comment by suyal...@gmail.com on 9 Dec 2012 at 7:58

[GoogleCodeExporter]

I have tried everything I can thin of.  The config file is loaded with my 
rumblepad 2 settings, and all buttons correspond in x360ce.exe.  the ini file 
matches.  I hear the beep but the game refuses to acknowledge the emulator.  
with or without emulator installed, the buttons are all different, it makes no 
difference with emulator or not.

Original comment by jonat...@jjtechcomputer.com on 10 Dec 2012 at 12:50

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I'm using a Speedlink XEOX controller which is essentially a cheap xbox 
controller. Batman used to try to detect a controller using its own detection 
and that might be causind what you are experiencing. All I know is that you 
need to use xinput9 or it won't work.

Original comment by jimbo80...@gmail.com on 13 Dec 2012 at 2:02

[GoogleCodeExporter]

Got Arkham Assylum to work, steam version.  Used x360ce app in 
steam/common/steamapps/Batman Arkham Asylum GOTY/Binaries, using 
xinput9_1_0.dll.  The only way it works is to double-click the BmStartApp 
application in that folder DIRECTLY, don't use the BmLauncher or play from your 
library in steam.

Original comment by shonhar...@gmail.com on 11 Jan 2013 at 6:35

[GoogleCodeExporter]

I'm experiencing the exact same issues as jonat. Tried many different versions 
of x360ce. tried xinput9. uninstalled and reinstalled. I'm using "Logitech Dual 
Action".

Original comment by TheAntCo...@gmail.com on 26 Jan 2013 at 2:52

[GoogleCodeExporter]

@TheANtCo.. & @jonat..
Sorry guys, can't help you much, because I did not use logitech gamepad. My 
config is for Twin USB Controller ( Playstation 2 controller + Converter )

Original comment by suyal...@gmail.com on 27 Jan 2013 at 6:24

[GoogleCodeExporter]

Original comment by tapcio on 30 Jan 2013 at 6:14

• Changed state: Accepted

[GoogleCodeExporter]

I will install and test this soon

however i believe its an invalid/fixed some time ago.

Original comment by danialho...@gmail.com on 1 Feb 2013 at 5:22

[GoogleCodeExporter]

issue is in users configuration or incorrect file name used

Original comment by danialho...@gmail.com on 15 Feb 2013 at 7:24

• Changed state: Invalid
• Added labels: Type-Other
• Removed labels: Type-Defect

[GoogleCodeExporter]

Was the issue of jonat.. and TheAntCo.. ever resolved with the Logitech Dual 
Action? Having the same issue as them and I can't make it work. Interesting to 
note, however, that after using x360ce, I'm able to control the "Games for 
Windows Live" interface with the controller, and all directions and buttons 
behave correctly there. In the game, however, everything is still backwords.

Original comment by MattRobi...@gmail.com on 25 May 2013 at 6:07

[GoogleCodeExporter]

#21 I am using a dragonplus with ps2 adapter wireless I can't find the 
"BmStartApp"  you mentioned, only the BmLauncher, and it doesn't load at either.

the steam path for the binaries is

 steam/common/steamapps/Batman Arkham Asylum GOTY/Binaries/win32.

I can't it make it work. 

Original comment by pikilon on 8 Jun 2013 at 4:49

[GoogleCodeExporter]

piki use this one, it's should work now :). Copy all the file in binaries 
folder.

Original comment by cash_vil...@hotmail.com on 25 Aug 2013 at 4:42

Attachments:

• x360ce.rar

[GoogleCodeExporter]

I don't know if anyone is still experiencing this issue with Logitech Dual 
Action. What helped me was revert to old release x360ce.App-2.0.2.163 and it 
worked flawlessly for all games.

Original comment by bl00dy...@gmail.com on 26 Oct 2013 at 10:45

[GoogleCodeExporter]

Thanks bl00dy, that worked.

Original comment by DOT...@googlemail.com on 30 Oct 2013 at 10:05

[GoogleCodeExporter]

I tried 3 hours but I could not make it work. I have a Hama X-Style Wireless 
Pad. X360ce seems to work fine, tried all the above but I dont even hear the 
beep in game. Tried the xinput9_1_0.dll option, all Hook modes. This is just 
crap! 

Original comment by maed...@gmail.com on 4 Dec 2013 at 8:44

[GoogleCodeExporter]

I'm having the same problem using a Nyko Airflo. It worked on Asylum but it 
won't here, and I've used every possible fix, including x360ce.

Original comment by sixsided...@gmail.com on 4 Dec 2013 at 8:41

[GoogleCodeExporter]

@ Bl00dy Thanks! That solved my problem.

Original comment by BishopKn...@gmail.com on 5 Mar 2014 at 11:23

[GoogleCodeExporter]

I tried everything, and I can't get my Dualshock 2 to work correctly with this 
game! The A and Y buttons are swapped.

Original comment by beterrab...@gmail.com on 28 Dec 2014 at 12:58

[GoogleCodeExporter]

I also had this problem with my PS2 Twin adapter. I tried the Xinput9_1_0.dll 
trick like the other PS2 owners. It didn't work for me for some reason. The 
game wouldn't read the file. I also tried using Xinput1_3.dll and it didn't 
work at first. I was using the .163 version of the file. And then I reverted 
back to the .158 version of the Xinput1_3.dll file and it worked. 

So for those still having problems, try using an older version of the x360ce 
app. That's what worked for me. 

Original comment by Love789m...@Yahoo.com on 1 Jan 2015 at 1:23

[GoogleCodeExporter]

Or maybe use latest supported library (r848) ? x360ce.App 2.0.2.163/2.0.2.158 
includes terrible broken r444 library.

Original comment by tapcio on 1 Jan 2015 at 1:35