search

GloDroid / glodroid_manifest

Android port that aims to bring both user- and developer-friendly experience in using AOSP with a set of single-board computers (SBC), phones and other devices.
472 stars 66 forks source link

Porting to Orange Pi Plus / Plus 2 #15

Closed vikitinho closed 4 years ago

vikitinho commented 4 years ago

I'm trying to port your project to run on an Orange Pi Plus / Plus 2 and thus contribute to more users.

I created a new device dir based on the plus2e configuration files, changed the dtb kernel to the respective one for this device (sun8i-h3-orangepi-plus.dtb), did the same for the uboot configuration.

After generating the sdcard.img, android starts, but I see the TV message "Android System: There's an internal problem with your device. Contact your manufacturer for details."

Attached ttyUSB log.

Is there anyone who can and wants to help me? minicom-09042020.txt

Best Regards from Brazil

rsglobal commented 4 years ago

Hello,

Is seems that your system have similar issue with opi3 and musb driver is configured to host mode only. The solution was to override this settings using device-tree overlay. Refer to https://github.com/GloDroid/glodroid_device/commit/a89844656b7343628b5892469b18ccc10e68c2a5 for more information.

At least you should be able to run adb shell, use fastbootd, etc. after that.

vikitinho commented 4 years ago

I tried to make the suggested change, but I get a new error ...

Loading Environment from EXT4... 
** Unable to use mmc 0:auto for loading the env **
In:    serial
Out:   serial
Err:   serial
Net:   phy interface7
eth0: ethernet@1c30000
starting USB...
No working controllers found
Autoboot in 1 seconds, press <Space> to stop
1871 bytes read in 1 ms (1.8 MiB/s)
## Executing script at 53000000
switch to partitions #0, OK
mmc0 is current device

MMC read: dev # 0, block # 8192, count 49152 ... 49152 blocks read: OK
failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND
## Booting Android Image at 0x50008000 ...
Kernel load addr 0x40088000 size 7207 KiB
Kernel command line: androidboot.hardware=plus buildvariant=userdebug
RAM disk load addr 0x43300000 size 6122 KiB
   Loading Kernel Image
   Loading Ramdisk to 49a05000, end 49fff415 ... OK

Starting kernel ...

Error: invalid dtb and unrecognized/unsupported machine ID
  r1=0x00000000, r2=0x40000100
  r2[]=05 00 00 00 01 00 41 54 00 00 00 00 00 00 00 00
Available machine support:

ID (hex)        NAME
ffffffff        Generic DT based system
ffffffff        Allwinner suniv Family
ffffffff        Allwinner sun9i Family
ffffffff        Allwinner A83t board
ffffffff        Allwinner sun8i Family
ffffffff        Allwinner sun7i (A20) Family
ffffffff        Allwinner sun6i (A31) Family
ffffffff        Allwinner sun4i/sun5i Families

Please check your kernel config and/or bootloader.

I'll do more detailed tests and I'll be back when I have more information. I appreciate the support.

rsglobal commented 4 years ago

Could you share you changes?

hostkit commented 4 years ago

Hello,

Is seems that your system have similar issue with opi3 and musb driver is configured to host mode only. The solution was to override this settings using device-tree overlay. Refer to GloDroid/glodroid_device@a898446 for more information.

At least you should be able to run adb shell, use fastbootd, etc. after that.

Sometimes plus2e Android System: There's an internal problem with your device. Contact your manufacturer for details.

BigJacek commented 4 years ago

Hello, Clould you pls. extend the project to support Orange Pi Plus / Plus 2? Best regards, Jacek

rsglobal commented 4 years ago

Hello Jacek,

Thank you for your request. Currently our team does not have such boards. I will ask Xunlong to sponsor our project with boards, and will start working on new devices as soon as they arrive.

BigJacek commented 4 years ago

Hello, Thank you very much for your quick answer. I keep my fingers crossed for a quick delivery of the device from your sponsor and I hope that Orange Pi Plus / Plus 2 will soon be supported. Best regards, Jacek

BigJacek commented 4 years ago

Btw. Can I help in some way? I'm new here, but if there's anything I can do, I'd love to join in.

rsglobal commented 4 years ago

Hello Jacek,

Yes you can. Enabling basic functionality for plus / plus2 is trivial task, but it require testing on real hardware. You can build it yourself or I can provide images for testing.

Regards, Roman

BigJacek commented 4 years ago

OK. So I have one piece of Orange Pi Plus2 H3 and I would like to test something. So let's start with an image for testing. After all, I would like to be able to build the image myself.

BigJacek commented 4 years ago

Hello Roman, Can you provide images for testing? Regards, Jacek

rsglobal commented 4 years ago

Hi Jacek, Just give me a couple of days. Currently I am working on rpi4 integration. I will start working on this issue soon. Regards, Roman

BigJacek commented 4 years ago

Roman, Sure, no problem. In the meantime I'm trying to build GloDroid repo on my PC. We're in contact. Jacek

BigJacek commented 4 years ago

Hello Roman, I'm trying to build GloDroid repo on my PC based on description in the web. There are some problems and finally there are unable to sync repo. Pls. see errors below: error: build/blueprint/: platform/build/blueprint checkout 675d72d5f3b3200f6dcc174d8bda00c227abd36c error: external/autotest/: platform/external/autotest checkout 0c09d81ab60ad4e45c0dacb9f4ddb989f16e20e6 error: external/kmod/: platform/external/kmod checkout e6417e44d57fcdfcce1eb96f9443dca49bdf91ea error: external/libunwind/: platform/external/libunwind checkout 7da670a13886265d84bd5d78475a6329c038df10 and finally: error: unable to create file tests/P_str_escape/str\escape.rs: Zły argumentdating files: 57% (491/856) error: Cannot checkout platform/frameworks/compile/slang: GitError: Cannot initialize work tree for platform/frameworks/compile/slang error.GitError: Cannot initialize work tree for platform/frameworks/compile/slang

Is there any solution for that? Jacek

rsglobal commented 4 years ago

Hello Jacek,

Could you check disk space usage? df -h

BigJacek commented 4 years ago

Hello, Disk usage: System plików rozm. użyte dost. %uż. zamont. na udev 1,9G 0 1,9G 0% /dev tmpfs 391M 1,9M 390M 1% /run /dev/sda5 20G 14G 4,6G 75% / tmpfs 2,0G 0 2,0G 0% /dev/shm tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 2,0G 0 2,0G 0% /sys/fs/cgroup /dev/loop0 55M 55M 0 100% /snap/core18/1705 /dev/loop1 55M 55M 0 100% /snap/core18/1754 /dev/loop3 50M 50M 0 100% /snap/snap-store/433 /dev/loop2 256M 256M 0 100% /snap/gnome-3-34-1804/36 /dev/loop4 63M 63M 0 100% /snap/gtk-common-themes/1506 /dev/loop5 31M 31M 0 100% /snap/snapd/7777 /dev/loop6 28M 28M 0 100% /snap/snapd/7264 /dev/loop7 50M 50M 0 100% /snap/snap-store/454 /dev/loop8 241M 241M 0 100% /snap/gnome-3-34-1804/24 /dev/sda1 511M 4,0K 511M 1% /boot/efi vmhgfs-fuse 238G 186G 53G 78% /mnt/hgfs tmpfs 391M 20K 391M 1% /run/user/1000 /dev/sdb1 299G 69G 230G 23% /media/adminek/Citrix

repo is on resource sdb1

Regards, Jacek

rsglobal commented 4 years ago

I've had similar issue. In my case repository in .repo/projects/directory was broken. Try to delete repositories listed in error log you've attached from .repo/projects/ and run repo sync again.

BigJacek commented 4 years ago

Yes. I thought about it too, and I did, but still no luck. I removed the whole repo and I'm starting over.

BigJacek commented 4 years ago

The fourth time after each repo removal, the synchronisation was finally completed.

BigJacek commented 4 years ago

Hello, I wanted to biuld image for sdcard (for testing purposes) but everytime I've got an error: $ make sdcard PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=10 TARGET_PRODUCT=opi_pc TARGET_BUILD_VARIANT=userdebug TARGET_BUILD_TYPE=release TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a-neon TARGET_CPU_VARIANT=generic HOST_ARCH=x86_64 HOST_2ND_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-5.4.0-37-generic-x86_64-Ubuntu-20.04-LTS HOST_CROSS_OS=windows HOST_CROSS_ARCH=x86 HOST_CROSS_2ND_ARCH=x86_64 HOST_BUILD_TYPE=release BUILD_ID=QQ2A.200305.004.A1 OUT_DIR=out [100% 47/47] out/soong/.bootstrap/bin/soong_build out/soong/build.ninja FAILED: out/soong/build.ninja out/soong/.bootstrap/bin/soong_build -t -l out/.module_paths/Android.bp.list -b out/soong -n out -d out/soong/build.ninja.d -globFile out/soong/.bootstrap/build-globs.ninja -o out/soong/build.ninja Android.bp Killed 21:26:56 soong bootstrap failed with: exit status 1 ninja: build stopped: subcommand failed.

failed to build some targets (05:19 (mm:ss)) What could be wrong?

Jacek

rsglobal commented 4 years ago

You are out of memory. Close chrome and other apps and try again. Also you should have at least 16gb of RAM. Doing make -j1 sdcard could also help, but on final building stages.

BigJacek commented 4 years ago

Ah, ok. I'm working on VM so I just can forget about this.

hostkit commented 4 years ago

You are out of memory. Close chrome and other apps and try again. Also you should have at least 16gb of RAM. Doing make -j1 sdcard could also help, but on final building stages.

Higher specific unable build it self

BigJacek commented 4 years ago

Lack of RAM. I won't go through with it now.

BigJacek commented 4 years ago

Hello Roman, Can you provide some images for testing (when you have a moment, of course)? Regards, Jacek

BigJacek commented 4 years ago

Unfortunately, that's all I can do right now.

rsglobal commented 4 years ago

Hello Jacek,

I've built images for you. I expect some issues since kernel is mainline without Google patches. But UI should start. https://drive.google.com/file/d/1gJCYklek2yMQDqpokeZo2pl9ILPRUtVK/view?usp=sharing

Use https://github.com/GloDroid/glodroid_manifest/blob/next/README.md as manual for deploying.

BigJacek commented 4 years ago

Hello Roman, I'm starting to work on this. JaS

BigJacek commented 4 years ago

Roman, I've got a problem. In recovery mode device is not listed by command "adb devices" (every time I get a message: error: no devices/emulators found). However device is mapped as removables device (Onda MT65xx Preloader). I'm using Ubuntu 20.04 LTS. Regards, Jacek

vikitinho commented 4 years ago

Hi Roman,

I did the same test and got the same error.

Attached ttyUSB log.

minicom-18062020.log

rsglobal commented 4 years ago

In case you are in fastbootd mode, adb won't work. try ./fastboot reboot-recovery to reboot into recovery.

I'll look into it tomorrow.

BigJacek commented 4 years ago

I did this also but no reaction on Pi Plus 2 side. (not reload/reboot)

BigJacek commented 4 years ago

< waiting for any device >

and nothing more...

rsglobal commented 4 years ago

Jacek,

Unfortunately I can see no usb_otg node in orange pi plus device tree in both u-boot and kernel project. You can try to copy-paste it from opi pc, recompile kernel and try again.

rsglobal commented 4 years ago

Plus2 board have no schematic publicly available. To enable USB I should specify to which H3 SOC pin USB-ID OTG contact is routed.

Can anybody who have broken board, remove SOC and probe ID pin using multimeter?

BigJacek commented 4 years ago

I dont know if it will be usefull/helpful but there is orangepi-plus-h3-v1_1_schematic available (https://pan.baidu.com/s/1bnppzv5). As far as I can see, the firmware is the same for both versions, so maybe the architecture is similar.

rsglobal commented 4 years ago

Thank you for the link. Lets assume plus and plus2 have same pcb layout. From the circuit diagram:

PG12 - USB0_IDDET
PL2 - USB0_DRVVBUS
BigJacek commented 4 years ago

ok.

BigJacek commented 4 years ago

I was just about to write it. ;)

rsglobal commented 4 years ago

@BigJacek , @vikitinho I've updated images, could you test it please? https://drive.google.com/file/d/1AnSOOrhmPjvxW9sMMOE_NzwxXdhIR50t/view?usp=sharing

BigJacek commented 4 years ago

Roman, I'm starting to work on this. JaS

BigJacek commented 4 years ago

Brief summary: I flashed Android on sdcard using a new deploy-sd.img. Inserted recovery sdcard into the OPP2 board. Connected microusb cable to OTG connector and my PC. Powered-up the board. After a short while the system (Windows 10) detected a new device in the Universal Serial Bus Controllers section (Unknown USB device (port reset failed). Since I'm working on Ubuntu using VM I can't remap this device on VMware (just can't see it). The difference is that the device is already in the system. I tried also fastboot reboot-recovery in Windows but still < waiting for any device > only and nothing more...

BigJacek commented 4 years ago

maybe @vikitinho will have more luck

BigJacek commented 4 years ago

I tried to install various drivers for this device in Windows but without success (even in unsigned driver installation mode).

vikitinho commented 4 years ago

I'm starting to work on this.

I return with information in a few hours

vikitinho commented 4 years ago

Boot OK:

minicom-19062020.log

Fastboot nOK

I believe there is a problem with the driver on ubuntu, you will analyze and analyze information later.

ubuntu@ubuntu:~$ dmesg -w [ 3055.245373] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 3056.213471] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 3056.213557] usb usb3-port1: attempt power cycle [ 3057.497439] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 3058.465445] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [ 3058.465531] usb usb3-port1: unable to enumerate USB device

@rsglobal

Can you share the device directory with the mk you created so that I can try to directly generate the final image on the SD?

rsglobal commented 4 years ago

@vikitinho @BigJacek ,

Thanks for testing. The problem with USB enumeration is from device side. Lets make 2 more attempts with different DTS node enabled.

rsglobal commented 4 years ago

Attempt #3: https://drive.google.com/file/d/1w5fIzY07AYOdB8IrwH5xJ9G9npy6C9jE/view?usp=sharing

BigJacek commented 4 years ago

ok. I'm starting to work on this.

BigJacek commented 4 years ago

Brief summary: Windows 10 detected a new device in the Universal Serial Bus Controllers section (Unknown USB device (port reset failed). new: at now it is possible to remap this device on VMware and is visible on ubuntu as "google usb download gadget". I tried "fastboot reboot-recovery" in Windows and Ubuntu also but still < waiting for any device > only and nothing more...