How to support a usb gps receiver(ublox 7020) on rpi4?

GloDroid / glodroid_manifest

Android port that aims to bring both user- and developer-friendly experience in using AOSP with a set of single-board computers (SBC), phones and other devices.

472 stars 66 forks source link

How to support a usb gps receiver(ublox 7020) on rpi4? #211

Closed aswjh closed 1 year ago

aswjh commented 2 years ago

rpi4:/ # ls /dev/tty*
/dev/tty /dev/ttyACM0 /dev/ttyS0 /dev/ttyprintk

rpi4:/ # cat /dev/ttyACM0 $GPTXT,01,01,02,u-blox ag - www.u-blox.com50 $GPTXT,01,01,02,HW UBX-G70xx 00070000 77 $GPTXT,01,01,02,ROM CORE 1.00 (59842) Jun 27 2012 17:43:5259 $GPTXT,01,01,02,PROTVER 14.001E $GPTXT,01,01,02,ANTSUPERV=AC SD PDoS SR20 $GPTXT,01,01,02,ANTSTATUS=OK3B $GPTXT,01,01,01,NMEA unknown msg58 $GPTXT,01,01,02,LLC FFFFFFFF-FFFFFFFD-FFFFFFFF-FFFFFFFF-FFFFFFF953

jojo2357 commented 2 years ago

I do not know anything about this project, but I have used a GPS over Serial on Rapbian before. I wrote my own software to just listen in and handle that information, and I know that some use gpsd. If this isn't helpful I apologize, just trying to help

rsglobal commented 1 year ago

Closing due to inactivity. Feel free to reopen it if your issue is still relevant.