search

GloDroid / glodroid_manifest

Android port that aims to bring both user- and developer-friendly experience in using AOSP with a set of single-board computers (SBC), phones and other devices.
472 stars 66 forks source link

[Bug] glodroid 0.1.0 #9

Closed hostkit closed 4 years ago

hostkit commented 4 years ago

After flashing your release sdcard image and load my sdcard. My opi only stuck on Android logo more than 1hours. I don't know to get log.

dd command using libreelec, win32diskimg, and etcher

rsglobal commented 4 years ago

I suppose that you can have no heat-sink mounted on your OPI SOC.

We are using 40x40mm heat-sink.

opi_heatsink

hostkit commented 4 years ago

My opiplus2e mount heatsink and fan. Still not working.

Device: opi plus2 e Lan: plug or unplug, device stuck on logo Heatsink: mount permanent (+type) Fan 5v: plug and unplug, device stuck on logo Adaptor: 5v3a Img: your release img

hostkit commented 4 years ago

I suppose that you can have no heat-sink mounted on your OPI SOC.

We are using 40x40mm heat-sink.

opi_heatsink

I think your device not plus2e or maybe opiplus2e have different type? IMG_20200222_060531

rsglobal commented 4 years ago

Yes, you are right, I sent a photo of opi-win (A64 soc). We have same size heatsink on opi-plus2e.

If you are sure that there is no overheat, please check you have got 5V, 2A power supply and cable with low voltage drop.

hostkit commented 4 years ago

Yes, you are right, I sent a photo of opi-win (A64 soc). We have same size heatsink on opi-plus2e.

If you are sure that there is no overheat, please check you have got 5V, 2A power supply and cable with low voltage drop.

I don't know how to check when board offline, but when using libreelec only 45-47 °C. Adapter? Ok will be check my volt and Amper

rsglobal commented 4 years ago

According to my experience the heat-sink on your photo is too small when using OPI's GPU. Such distributive as armbian does not use GPU hardware acceleration and can work even without heat-sink. I believe libreelec also. Soon we plan to switch to kernel 5.6, where thermal driver is available. After that you should experience just performance drop instead of hang in case of overheating.

hostkit commented 4 years ago

Do you know, how to remove old heatsink with thermal tape? I want to replace with new heatsink

hostkit commented 4 years ago

Ok. I have been successful remove old heatsink. which part must be installed new 40x40 heatsinks? Part 1-5 single heatsink 40x40 without part 6 or 1-5 single heatsink+ part 6 with small heatsink? 75078905-7ef98500-5539-11ea-8c50-53b646438561~2

rsglobal commented 4 years ago

SOC heats mostly. So only 5.

rsglobal commented 4 years ago

Try v0.2.0. For me it works even without heatsink: https://github.com/GloDroid/glodroid_manifest/releases/tag/v0.2.0