search

GoXLR-on-Linux / goxlr-on-linux

Documentation and scripts to make the GoXLR and GoXLR Mini useful on Linux.
142 stars 8 forks source link

Unable to get GoXLR Mini working on new Pop!_OS install #37

Closed Dinnerbone closed 2 years ago

Dinnerbone commented 2 years ago

Hello! Firstly I've tried the install.sh method but it would just spam me with Failure: Module initialization failed and not work, not list any devices. After advice on discord I've tried the new ALSA method but that also doesn't seem to work for me.

Output of aplay -L with alsa method:

hw:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    Direct hardware device without any conversions
plughw:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    Hardware device with all software conversions
sysdefault:CARD=GoXLRMini
    GoXLRMini, USB Audio
    Default Audio Device
front:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    Front output / input
surround21:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=GoXLRMini,DEV=0
    GoXLRMini, USB Audio
    Direct sample mixing device
usbstream:CARD=GoXLRMini
    GoXLRMini
    USB Stream Output

The GoXLR Mini has been initialized in a windows VM, and works on a dedicated windows install.

Running a fresh install of Pop!_OS 21.10 on kernel 5.15.8-76051508-generic

lm41 commented 2 years ago

Clould you please provide the information asked there? https://github.com/alsa-project/alsa-ucm-conf/issues/133 I've opened an issue at the alsa-ucm-conf, where your issue can hopefully be fixed.

FrostyCoolSlug commented 2 years ago

Closing this issue as it was resolved on discord (there was an initialisation issue).