GrumpyMeow XiaomiXiaofangFirmware issues

GrumpyMeow / XiaomiXiaofangFirmware

Custom firmware for the Xiaomi Xiaofang IP Camera

42 stars 11 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Can't connect to local wifi

#42 mikkel75 opened 5 years ago
0
fixed iw compilation

#41 gipsh closed 6 years ago
0
Copy of SN986_1.60_QR_Scan_019a_20160606_0951.tgz

#40 randomiq closed 6 years ago
2
Infra red / night view doesn't activate

#39 sshaikh opened 6 years ago
0
Hangs from time to time

#38 sshaikh opened 6 years ago
1
Revert to Stock

#37 kslmgd opened 6 years ago
5
is onvif working?

#36 trilu2000 opened 6 years ago
0
wpa_supplicant cannot connect

#35 maxpowel opened 7 years ago
1
"galaxy server message queue init failed"

#34 sshaikh closed 7 years ago
5
/dev/vmallocinfo is not present as on original firmware

#33 GrumpyMeow closed 7 years ago
1
Kernel BUG when loading module snx_nvram

#32 GrumpyMeow opened 7 years ago
0
Enable CONFIG_FAT_WRITE for U-Boot fatwrite support

#31 GrumpyMeow closed 7 years ago
1
Xiaomi uses mtd4 for JFFS2. SDK uses MTD3

#30 GrumpyMeow opened 7 years ago
1
The recovery firmware (FIRMWARE660R_F.bin ) build by the SDK is not an ELF executable

#29 GrumpyMeow opened 7 years ago
0
Netdetect uses eth0

#28 GrumpyMeow closed 7 years ago
1
Illegal instruction during boot.

#27 GrumpyMeow opened 7 years ago
1
fps=30 is out of range(0~20)!

#26 GrumpyMeow opened 7 years ago
0
/tmp/sources.conf is not exsiting,now create it.

#25 GrumpyMeow opened 7 years ago
0
net_detect pings eth0, should ping wlan0

#24 GrumpyMeow closed 7 years ago
1
/var/mq is now under /root.. That's not right.

#23 GrumpyMeow opened 7 years ago
0
/bin/wsdd not found

#22 GrumpyMeow opened 7 years ago
0
Add dropbear ssh and/or telnet

#21 GrumpyMeow opened 7 years ago
0
.config files don't get added to Github via upload

#20 GrumpyMeow closed 7 years ago
1
The "Live Preview" doesn't work in many browsers as it requires the VLC ActiveX component which is nowadays not supported any more.

#19 GrumpyMeow opened 7 years ago
0
/cgi-bin/getsystemtime.cgi failes with 502 (Bad gateway). Underlying error: cgi_header: unable to find LFLF

#18 GrumpyMeow opened 7 years ago
0
WebAdmin > Help button does not work.

#17 GrumpyMeow opened 7 years ago
0
WebAdmin > Media > Video Settings. Does not go above 1280x720.

#16 GrumpyMeow opened 7 years ago
1
WebAdmin > Media > OSD Settings. Depends on VLC ActiveX component.

#15 GrumpyMeow opened 7 years ago
0
WebAdmin > Media > Private Mask. Does not respond.

#14 GrumpyMeow opened 7 years ago
0
WebAdmin > Network > Socks. Gives 502 error. /etc/tsocks.conf is missing. It doesn't get copied from etc_default to /etc... Dunno why?

#13 GrumpyMeow opened 7 years ago
0
WebAdmin > Event > Motion Detection. Gives 502 error

#12 GrumpyMeow opened 7 years ago
0
WebAdmin > System > Information. Gives 502 error.

#11 GrumpyMeow opened 7 years ago
0
WebAdmin > System > Date & Time. Gives 502 Error. . Cant find the key ./sys_time.cgi

#10 GrumpyMeow opened 7 years ago
0
etc partition does not get overwritten completely

#9 GrumpyMeow closed 7 years ago
2
motionStart.sh uses "motionmonitor" but is not present.

#8 GrumpyMeow opened 7 years ago
0
Proj-Sonix Discovery.xml scopes probably not correct for this device.

#7 GrumpyMeow opened 7 years ago
0
Proj-Sonix (Galaxy Server) uses configuration files out of /tmp. This means that changes via the WebAdmin will not survive a reboot.

#6 GrumpyMeow opened 7 years ago
0
Many information is being written to the console (by snx_vc / proj-sonix and RTL8188)

#5 GrumpyMeow opened 7 years ago
0
The files in /var/mq are not being provisioned. Probably because they are 0 bytes of size.

#4 GrumpyMeow opened 7 years ago
0
snx_nvram module is missing

#3 GrumpyMeow opened 7 years ago
3
snx_crypto is missing

#2 GrumpyMeow opened 7 years ago
0
SnOnvif is not present

#1 GrumpyMeow opened 7 years ago
0