search

Guido68 / rush-osd-development

Automatically exported from code.google.com/p/rush-osd-development
0 stars 0 forks source link

Cannot setup with multiwii pro #34

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
Rush OSD is flushed properly, working pretty well on simulator. When connected 
to MultiWii Pro flight controller - there is no output and yellow LED flashes 
only once upon startup and then goes off (while it should rapidly flashing 
indicating communication). I noticed that when I connect flight controller also 
to computer through USB, minim osd also starts working fine and works even 
after disconnecting FC from computer...

looks like some communication initialisation problem. tried to reduce baud rate 
(in config and in OpenSerial function call according to issue #21 
https://code.google.com/p/rush-osd-development/issues/detail?id=21)

What is the exact brand and model of hardware you´r using?
Multiwii flight controller: 
http://www.rcgroups.com/forums/showthread.php?t=1770898

I connect minim osd to serial 0 (telemetry) located next to radio ports.

Original issue reported on code.google.com by maciej.l...@gmail.com on 18 Mar 2015 at 10:19

GoogleCodeExporter commented 9 years ago 
Blutooth telemetry connected to the very same serial works very well...

Original comment by maciej.l...@gmail.com on 19 Mar 2015 at 7:21

GoogleCodeExporter commented 9 years ago 
it was FC problem - there was only 4.2V ouput on serial ports...

Original comment by maciej.l...@gmail.com on 1 Apr 2015 at 2:18