search

Guido68 / rush-osd-development

Automatically exported from code.google.com/p/rush-osd-development
0 stars 0 forks source link

Voltage Hardware mod #4

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1.Just turn on my minimosd and voltage goes 0.0
2.it's 
http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=862&productname= 
 //rctimer mavlink

3.i've soldered the right pin rotated 45 º

What is the expected output? What do you see instead?
12.6 // 0.0

What version of the product are you using? On what operating system?
lastest //windows.
multiwii 2.2 crius aio pro 
with vbat on.

Please provide any additional information below.

Original issue reported on code.google.com by rsalazar...@gmail.com on 16 Apr 2013 at 11:13

GoogleCodeExporter commented 9 years ago 
Sorry but I do not understand your statement. Your voltage is 0 because you did 
not configured it right on GUI.
If you are using VBAT (as you say) you need to select that option for main 
voltage, if not you need to enable OSD read ADC.

Please read all available documents and inclusive available videos before 
consider a software defect.

Cheers,
KV

Original comment by katawentos on 17 Apr 2013 at 4:39

GoogleCodeExporter commented 9 years ago 
THX very much ! , it was the ADC thing , LOL

the thing is that it's not very well commented , if i may beg for you to
publish it in the wiki hardware page mode , as a note ..

XD

Original comment by rsalazar...@gmail.com on 18 Apr 2013 at 2:30

GoogleCodeExporter commented 9 years ago 
Great, good to see that you are ok now.
I will read the documents carefully and add that information where it belongs 
if not already.

Have fun and fly safe!
KV

Original comment by katawentos on 18 Apr 2013 at 11:48